Ipa

Lumorales1975

Lumorales1975

New member
Joined
Jun 20, 2017
Messages
98
Reaction score
0
What’s the best dilution to make IPA to clean panels and what the best percentage isopropyl alcohol


Sent from my iPhone using Tapatalk
 
Just a quick comment.

I have used Mike's technique to mix IPA since I started detailing. The only difference is that I use ONR instead of plain water to do the mix. The ONR provides lubricity and help prevent scratching of the surface as you clean it. Try as small batch and see it you like it better than just regular IPA.
 
I've personally started to go away from IPA mix. Once you start to use Carpro eraser you'll see why. Love the stuff. Also with ceramic coatings, some require a "primer" coating for best adhesion. With a primer coating, you are not doing a IPA wipe down or using Eraser prior to ceramic coating. If I do use IPA mix, I have a barrel of 99% IPA and mix at 50/50 with RO or de ionized water.
 
MrRoo said:
I've personally started to go away from IPA mix. Once you start to use Carpro eraser you'll see why. Love the stuff. Also with ceramic coatings, some require a "primer" coating for best adhesion. With a primer coating, you are not doing a IPA wipe down or using Eraser prior to ceramic coating. If I do use IPA mix, I have a barrel of 99% IPA and mix at 50/50 with RO or de ionized water.
Click to expand...

Thanks for the information I appreciate it


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top