It rained after my first coat of wax

S

ScottNM

New member
Joined
Aug 1, 2011
Messages
7
Reaction score
0
So my goal was to put 2 coats of KSG Sealand and the finish with a carnuba. I got AIO and the first coat of sealant. It then rained on my car. Should I wash car and put another coat of AIO to remove any posible water spots are just wash and continue with next coat of sealant then carnuba? Thanks
 
just dry the car off before it spots..then make sure you wait the proper amount of time before applying the second coat of sealant
 
ScottNM said:
So my goal was to put 2 coats of KSG Sealand and the finish with a carnuba. I got AIO and the first coat of sealant. It then rained on my car. Should I wash car and put another coat of AIO to remove any posible water spots are just wash and continue with next coat of sealant then carnuba? Thanks
Click to expand...

Wash and dry as you normally would then apply another coat of sealant. Sealants can be layered on top of itself without issue. If you choose to use carnauba then overcoat with carnauba as sealants don't bond well with carnauba waxes.
 
I'd do an ONR wash then put on your next layer of ksg. If you use the aio, it will remove the first layer of ksg
 
I am not acronym savvy here yet. What is a "ONR" wash? Thanks everyone.
 
No rinse wash would not work for me. I live in NM and have a sand/dust mixture already on the car that has to be rinsed off even before I wash or I will it will be abrasive on my finish.
 
they use no rinse washes in Australia where certain areas are drought stricken and cant use water to wash cars, and usually their vehicles are covered in dirt, if it works for them without marring should work for you....just letting you know..
 
Use ONR as a QD. It cleans and the stuff left behind won't interfere with KSG.
 
You must log in or register to reply here.
Back
Top