Just finished Cleaning The Firebird

94LT1

94LT1

New member
Joined
Mar 29, 2008
Messages
537
Reaction score
0
Im new to the detailing world.For the first time i used my Porter Cable 7424 with the following product.Pinnacle Advance Swirl Remover, Pinnacle Advance Polish, and Liquid Sourveran.Like i said iv never used any of this stuff b4 and im and VERY happy with the results.The firebird is a 1994 and has the original crappy GM paint except for the front fenders up to the front of the car.That paint is a year old.I started at 10:30am with a good wash and clay bar then i didnt finish with the Pinnacle Twins and souveran untill 5:30pm.let me know how i did.
4-5-08FirebirdDetail001.jpg

4-5-08FirebirdDetail004.jpg

4-5-08FirebirdDetail002.jpg

4-5-08FirebirdDetail007.jpg
 
Last edited:
Love the last shot it's very clear and sharp images. How did you like the swirl remover and polish? Easy to use?
 
the swirl remover didnt do much for me...it got rid of the acid rain.I like how the polish turned to dust and basically when it stopped turning to dust i would wipe and check and it was ready to come off.
 
sharper than when originally new ... nice work !
 
thanks everyone.Like i said it was my first attempt.But i am happy with the results.thanks autogeek for introducting me to other products.I really starting to like pinnacle products.
 
Nice job!Now change those camaro wheels for some torque thrust's or ROH's
 
02CAMSS said:
Nice job!Now change those camaro wheels for some torque thrust's or ROH's
Click to expand...

eh...i really like the SS/ZR1 style wheel.plus if i get any more money it will b for go fast mods.the tranny is on its way.my intake is drippin oil down the back of the engine so might be looking to get a better intake when i get the gasket replaced.

Smokindiesel said:
Good job Brian!!
Click to expand...

thanks again mike:cheers:
 
I had a 94 lt1 Camaro do not waste your money on a aftermarket intake!Get gears and a good nitrous kit(100 shot).
 
02CAMSS said:
I had a 94 lt1 Camaro do not waste your money on a aftermarket intake!Get gears and a good nitrous kit(100 shot).
Click to expand...
i was thinking about 3.73's.i wouldnt run nitrous on a LT1.id deffinetly run it on any LSx though.
 
3.73 (4.10 would be my choice for an auto) FTW and if you have an auto I would look into a stall converter and shift kit to wake it up. Thread jack off/
 
wytstang said:
3.73 (4.10 would be my choice for an auto) FTW and if you have an auto I would look into a stall converter and shift kit to wake it up. Thread jack off/
Click to expand...
Ya its auto.well im a 2nd year college student with a part time job.so all things in time...honestly id rather just wait till i get out of college and get a LS1 M6...i would have more to work with then
 
so im glad so far i got everyones approval.hopefully i get better and faster so i can do everything(interior & exterior)in the same amount of time.
 
What kind of products can i use to protect my wheels?I dont want anything that will hurt the bank.lol.i just used meg all wheel cleaner and then meg quick detailer.
 
You can use a wax or sealant to protect them. Makes them soooo much easier to clean, trust me my rims are white so I keep up with them to save myself lol.
 
I had spray on my 94 Z28 and it was the best money I ever spent.
 
94LT1 said:
What kind of products can i use to protect my wheels?I dont want anything that will hurt the bank.lol.i just used meg all wheel cleaner and then meg quick detailer.
Click to expand...

Brian ... I use DP Wheel Glaze ...

I can give you some if you want to try it
 
Looking clean! It's hard to come across a clean LT1 F-body these days....love the ZR1/SS wheels too.
 
You must log in or register to reply here.
Back
Top