I've been working on a red '85 Alfa Romeo Spider. I'm relatively new to detailing, getting into it over the past year or so. I started with some machine compounding and polishing on it, and it significantly improved the finish of the paint but there were still some scratches and oxidation in certain areas.
I didn't want to be too aggressive with the paint correction, primarily because I have a young child at home and want to avoid releasing paint dust, and therefore lead, into the environment. The scratches didn't bother me a whole lot, but the oxidation did.
I tried Mike's technique of using Meguiar's glaze #7 setting overnight to saturate the paint with feeder oils. This increased the gloss and shine of the paint and improved the appearance of the oxidation, but there was still more visible oxidation than I wanted.
I then recently discovered Klasse All-in-One Polish, and Klasse High Gloss Sealant Glaze. I believe the AIO polish has a chemical cleaner in it which would help remove some oxidation, so I applied it around the hood with a microfiber pad, which helped a little with the oxidation, but was disappointed that it didn't take care of most of it.
In a subsequent session I decided to use a second application of the AIO, hand-scrubbing around the hood with an orange Griot's Garage foam pad. As I was scrubbing it, to my delight it appeared that the oxidation was disappearing. However, I had picked up the HGSG sealant instead of the AIO. I was puzzled that the HGSG sealant appeared to remove more of the oxidation than the AIO polish.
I decided to apply the AIO with orange Griot's Garage foam pad to the remaining areas of oxidation around other parts of the car. Again, not much improvement. I then used the same pad (without washing out the AIO residue) and scrubbed HGSG sealant, scrubbing harder in those areas affected by oxidation. I saw some improvement, but some stubborn areas of significant oxidation (particularly on the strip between the covertible top and the trunk) still remained.
A day or two later, I looked at the paint and noticed that the oxidation had decreased since the day I applied the HGSG sealant. The paint still isn't perfect, but overall I'm pretty pleased with the appearance now.
I'm glad that the Klasse twins worked, but I have a few questions in my mind:
-I would have expected the chemical cleaner in the AIO polish to have more of an effect on the oxidation than the HGSG sealant, but the opposite was observed. Why? Is it because the fillers in the glaze just camouflaged the oxidation? I can understand how fillers can fill in scratches and hide scratches/swirls, but I have a hard time believing that such a thin layer of sealant/glaze can cover or hide visible oxidation. I'm not a chemist or physicist, but my best guess is that the high gloss shine that is imparted to the surface decreases the light reflecting off the underlying oxidized surface, making it appear to have less oxidation.
-Why did the oxidation appear to have improved over the next few days? Did it have something to do with curing of the sealant?
Sorry for the long post. I welcome any comments or explanations.
I didn't want to be too aggressive with the paint correction, primarily because I have a young child at home and want to avoid releasing paint dust, and therefore lead, into the environment. The scratches didn't bother me a whole lot, but the oxidation did.
I tried Mike's technique of using Meguiar's glaze #7 setting overnight to saturate the paint with feeder oils. This increased the gloss and shine of the paint and improved the appearance of the oxidation, but there was still more visible oxidation than I wanted.
I then recently discovered Klasse All-in-One Polish, and Klasse High Gloss Sealant Glaze. I believe the AIO polish has a chemical cleaner in it which would help remove some oxidation, so I applied it around the hood with a microfiber pad, which helped a little with the oxidation, but was disappointed that it didn't take care of most of it.
In a subsequent session I decided to use a second application of the AIO, hand-scrubbing around the hood with an orange Griot's Garage foam pad. As I was scrubbing it, to my delight it appeared that the oxidation was disappearing. However, I had picked up the HGSG sealant instead of the AIO. I was puzzled that the HGSG sealant appeared to remove more of the oxidation than the AIO polish.
I decided to apply the AIO with orange Griot's Garage foam pad to the remaining areas of oxidation around other parts of the car. Again, not much improvement. I then used the same pad (without washing out the AIO residue) and scrubbed HGSG sealant, scrubbing harder in those areas affected by oxidation. I saw some improvement, but some stubborn areas of significant oxidation (particularly on the strip between the covertible top and the trunk) still remained.
A day or two later, I looked at the paint and noticed that the oxidation had decreased since the day I applied the HGSG sealant. The paint still isn't perfect, but overall I'm pretty pleased with the appearance now.
I'm glad that the Klasse twins worked, but I have a few questions in my mind:
-I would have expected the chemical cleaner in the AIO polish to have more of an effect on the oxidation than the HGSG sealant, but the opposite was observed. Why? Is it because the fillers in the glaze just camouflaged the oxidation? I can understand how fillers can fill in scratches and hide scratches/swirls, but I have a hard time believing that such a thin layer of sealant/glaze can cover or hide visible oxidation. I'm not a chemist or physicist, but my best guess is that the high gloss shine that is imparted to the surface decreases the light reflecting off the underlying oxidized surface, making it appear to have less oxidation.
-Why did the oxidation appear to have improved over the next few days? Did it have something to do with curing of the sealant?
Sorry for the long post. I welcome any comments or explanations.