LC CCS vs Edge flat vs Edge Wave pads

T

tamvegas

New member
Joined
Feb 8, 2007
Messages
39
Reaction score
0
I have a full set of 7,5 inch and 4 inch LC CCS pads. Just spent about 12 hours on my 328ci with them. Noticed that while the 7.5 LC CCS pads work very well, I really like the idea of the Edge pads and would like to try them soon.

Anyone have a comparison of the Edge Wave vs regular (flat) pads? It looks to me as though the Wave pads would use up a lot more product than the regular Edge pads to get the same results. Anyone with experience on these?
The Edge system looks to give a lot more versatility in getting to all areas in addition to the quick change ability.

Thanks

Tam
 
I haven't tried them all, but I will say I will be changing my edge pads for the CCS pads soon.
 
abrcrombe - What's making you think of changing to the CCS pads?
 
This is just MY experience, but the edge pads have the quick switch going for them... but LC > edge in quality. I don't mind having to attach my pads manually, and perfect centering isnt a big deal with a PC. It matters a LOT more with a rotary.
 
abrcrombe -
Thanks, I was wondering about the quality of the foam. The LC CCS pads are the first I had ordered and the quality is very high. I have the 4 inch LC pads and they seem much more susceptable to wear. The LC CCS pads have gone through a long day of heavy use and with a good cleaning (DP) are like new. The 4 inchers show wear because they seem to catch on things easily. I wish they made the LC CCS in 4 inch size. It is a handy size to have (for bumpers, rocker panels etc).

Thanks again,

Tam
 
tamvegas said:
I have a full set of 7,5 inch and 4 inch LC CCS pads. Just spent about 12 hours on my 328ci with them. Noticed that while the 7.5 LC CCS pads work very well, I really like the idea of the Edge pads and would like to try them soon.

Anyone have a comparison of the Edge Wave vs regular (flat) pads? It looks to me as though the Wave pads would use up a lot more product than the regular Edge pads to get the same results. Anyone with experience on these?
The Edge system looks to give a lot more versatility in getting to all areas in addition to the quick change ability.

Thanks

Tam
Click to expand...

Got this from Aaron AT edge.........

For the rotary the Wave is the best for the PC flat is better, IMO. The Wave has 3 distinct advantages. It has less suface area to grip the paint so it does not bounce or what we call buffer hop, because there is less surface area and grip, there is less heat created and less chance to burn, and finally, the chemical instead of being on a flat surface and getting spit out, it hits the bumps on the way out and reduces the splatter.
 
BILL said:
Got this from Aaron AT edge.........

For the rotary the Wave is the best for the PC flat is better, IMO. The Wave has 3 distinct advantages. It has less suface area to grip the paint so it does not bounce or what we call buffer hop, because there is less surface area and grip, there is less heat created and less chance to burn, and finally, the chemical instead of being on a flat surface and getting spit out, it hits the bumps on the way out and reduces the splatter.
Click to expand...

Aaron -
Thanks for the reply. This is what I suspected from looking at them. As I've never used a rotary I didn't see what the Wave's advantage would be. Still not sure if I'll move over to the Edge sysem. I have only my one car to care for and have to see if the switch is going to be worthwhile/cost-effective.

Also, I don't see the 4 inchers )Edge) offered yet on AG and wonder when the set will be available?

Thanks
Tam
 
tamvegas said:
Aaron -
Thanks for the reply. This is what I suspected from looking at them. As I've never used a rotary I didn't see what the Wave's advantage would be. Still not sure if I'll move over to the Edge sysem. I have only my one car to care for and have to see if the switch is going to be worthwhile/cost-effective.

Also, I don't see the 4 inchers )Edge) offered yet on AG and wonder when the set will be available?

Thanks
Tam
Click to expand...

edge2000 system is the most cost effective since one double sided pad cost less than two single sided ones and the adaper which is guaranteed for life is usually cheaper than a backing plate. Also the 4 inchers have been on sale at AG for over a week.
 
abrcrombe said:
LC > edge in quality.
Click to expand...

I respectfully disagree with your assesment. In my experience Edge>LC in quality. I have three sets of Edge pads (flat 6.5", wave 6.5", and flat 4") and I have yet to have even one problem with any of them. All 14 of my Edge pads look brand new even though they have all been used multiple times.

Before switching to Edge pads I was using LC pads and I had the pad fly off the backing plate once or twice because the velcro on the BP was wearing out. Also, I had a couple of pads delaminate (velcro seperates from the foam). One of the pads delaminated after only one use. I also had a couple of LC pads were looking pretty chewed up after a few uses.

As far as flat vs. wave . . . as already stated I would get the flat pads if you are using a PC and the wave for rotary.
 
You must log in or register to reply here.
Back
Top