prin
Member
- Oct 24, 2008
- 264
- 0
So this truck was a recommendation from another client. The owner had taken the “FX-4” stickers off of the bed and it left markings that needed to be leveled out. So, the client assured me that it will be washed before I got there. Once I got there, I could tell what he had done. It had been taken through an automatic car wash!!!! I had to rewash it of course. Since I was only focusing on the paint, it didn’t take me too long. Once I shined my lights on the paint, I knew that I was in for a long time. So here we go!!
The paint was clayed with my clay mitt. I then used Meguiars m105 to level the paint. Some of body took more time than the others. This is due to the corners were scratched really bad from the brushes at the carwash. I then used 3D ONE for more leveling and polishing. The paint was then sealed with McKee’s paint sealant. Needles to say, he couldn’t believe the results!!!
Sent from my iPhone using Tapatalk
The paint was clayed with my clay mitt. I then used Meguiars m105 to level the paint. Some of body took more time than the others. This is due to the corners were scratched really bad from the brushes at the carwash. I then used 3D ONE for more leveling and polishing. The paint was then sealed with McKee’s paint sealant. Needles to say, he couldn’t believe the results!!!















Sent from my iPhone using Tapatalk