M105 + different finishing polish (not M205)

J

jernal024

New member
Joined
Feb 4, 2010
Messages
60
Reaction score
0
Hello,

I just bought some 105 that I plan on using this weekend. Does anyone know if it can be followed up with a different product besides M205. I am particularly interested in using Wolgang Finishing Glaze with it. Your thoughts are appreciated.
 
You can follow up with any product you want to. M105 finishes up really well so any type of fine polish will work. Thought I have m205, I rarely touch it and follow up M105 with optimum polish II or poli-seal.

I also know some people follow up M105 with Menz nano(106ff) which is similar to WG Finishing glaze so go for it.:xyxthumbs:
 
WG Finishing Glaze will work great after M105.

Matt
 
I've followed M105/UC with PO106fa, Final Polish II and PO85rd. They all finished down very nicely after the cutting compounds.
 
I use the M105 and Wolfgang finishing glaze all the time, it plays well together.
 
termigator said:
I've followed M105/UC with PO106fa, Final Polish II and PO85rd. They all finished down very nicely after the cutting compounds.
Click to expand...

Several of you have posted that you follow M105 or UC with PO85rd. In a separate thread I mentioned this combo and a lot of people felt that it needed to be a 3 step process and I needed a polish in between those two. Of course, UC finishes down really well and I felt that I could get away with a 2 step process. What pads do you all use for that 2 step process?

To the OP, as several have mentioned, any finishing polish would be fine. I have followed UC with Griot's 3 with great results. I have also followed UC with Menz PO85rd and then Duragloss 501 and the result was fantastic.
 
I personally love 205 but Ultrafina by 3M is another (milder) choice that is not a glaze.
 
jernal024 said:
Hello,

I just bought some 105 that I plan on using this weekend. Does anyone know if it can be followed up with a different product besides M205. I am particularly interested in using Wolgang Finishing Glaze with it. Your thoughts are appreciated.
Click to expand...


I did an Acura TSX 2010 with pretty bad shape paint. I used M105, Wolfgang Finishing Glaze, Blackfire Wet Look Sealant with Polycharge and Pinnacle Souveran Paste Wax on top of it. Beleived me when I tell you that I didn't know that M105 was this good. I also try Wolfgang Total Swirl Remover 3.0 but wasn't doing the job for me this time. I got pictures if you want to see the results. The owner told me that it was a diamond look. :xyxthumbs::xyxthumbs::xyxthumbs:
 
as2ortiz said:
I did an Acura TSX 2010 with pretty bad shape paint. I used M105, Wolfgang Finishing Glaze, Blackfire Wet Look Sealant with Polycharge and Pinnacle Souveran Paste Wax on top of it. Beleived me when I tell you that I didn't know that M105 was this good. I also try Wolfgang Total Swirl Remover 3.0 but wasn't doing the job for me this time. I got pictures if you want to see the results. The owner told me that it was a diamond look. :xyxthumbs::xyxthumbs::xyxthumbs:
Click to expand...

Pic please. What color Tsx?
 
You must log in or register to reply here.
Back
Top