Makita MAC5200

TL type S

TL type S

New member
Joined
Mar 16, 2011
Messages
112
Reaction score
0
Makita USA - Tool Details - MAC5200

Would you fellow Geeks and Geekets find this to be an option on your mobile detailing business? Would you select another brand or style and why?

Would this be a little overkill or maybe lacking in CFM for your taste?

Thinking of buying this unit and need feed back from those who know!

Thanks my brothers and sisters
 
Makita tools are very reliable and you definitely get what you pay for with them. I use a MAC2400 and it performs flawlessly day in and day out. The CFM is perfect for detailing, even at 4.2 CFM I can still get water out of cracks, run a tornador, use my air ratchet, and fill up tires. I say go for it, they make great tools. And while you are at it, pick up a 9227c from them.
 
JonMiles said:
Makita tools are very reliable and you definitely get what you pay for with them. I use a MAC2400 and it performs flawlessly day in and day out. The CFM is perfect for detailing, even at 4.2 CFM I can still get water out of cracks, run a tornador, use my air ratchet, and fill up tires. I say go for it, they make great tools. And while you are at it, pick up a 9227c from them.
Click to expand...

Thank you JonMiles,

I really appreciate your response!!:xyxthumbs:

About the 9227C...I ordered the Griots HD Kit.Should I add the 9227C even though the Griots is on its way already? I am thinking your response will be Yes?
 
I would rather buy one with a 25 gallon the least or 30 gallon air tank for mobile detailing.

"You can help create your own luck, you can make things happen through hard work and intelligence."- Donald J. Trump
 
ExoticAutoDetai said:
I would rather buy one with a 25 gallon the least or 30 gallon air tank for mobile detailing.

"You can help create your own luck, you can make things happen through hard work and intelligence."- Donald J. Trump
Click to expand...


Thank you.Now you have given me a lot to think about.I am now thinking spray gun in the near future.I just picked up a Sata Jet never used but it was FREEEEEEEEE!

He would`nt part with the Iwata..hehehe
 
TL type S said:
I am going full time with this.I would say I am in between pro and warrior.
Click to expand...

I would definitely pick up a rotary for compounding and polishing if you are doing this full time. It will save time and thus you will be able to do more cars and make more money. A 9227c is one of the options for rotary polishers. For the money, it is hard to beat and will last a long long time. You will eventually run into a cord problem which is an easy fix by replacing it with a 25ft extension cord.

Other options would be the new flex, dewalt, hitachi, fein, etc. Personally, the Makita is my go to rotary for the reasons: 1) I trust it, been using it for years with no problems 2) Low speed jeweling ability 3)well balanced 4) Relatively light weight 5) I like the colors, they match my business card.
 
TL type S said:
$350.00

Are you thinking more CFM for a spray gun in the future? Maybe that was me thinking that...lol
Click to expand...

Well like someone else said...Makita is a good brand...ive never heard anything bad about them. Since spray guns usually run closer to 40 PSI the CFM would for sure be higher at 40 PSI than 6.1 CFM @ 90psi i think it listed. For a little 3 gallon thats a lot of CFI and i guess it really depends upon your needs.

I'm gonna get a Craftsman 26 Gallon (used) compressor this weekend i found on craigslist for like $280...and it comes with a tool kit. The CFM for that is somewhere around 5.3 @90 and a little over 6 @ 40 PSI...which is enough to run SOME spray guns ive seen. I'm only going to be doing some spraying...and dont have room for a big 60 or 80 gallon one (or money for that matter lol) so this one looks like a good fit for me. Will work good at home and if i need to take it on a job i can.

Tell us this...what do you intend to be running with the compressor? What kinds of tools etc?
 
JonMiles said:
I would definitely pick up a rotary for compounding and polishing if you are doing this full time. It will save time and thus you will be able to do more cars and make more money. A 9227c is one of the options for rotary polishers. For the money, it is hard to beat and will last a long long time. You will eventually run into a cord problem which is an easy fix by replacing it with a 25ft extension cord.

Other options would be the new flex, dewalt, hitachi, fein, etc. Personally, the Makita is my go to rotary for the reasons: 1) I trust it, been using it for years with no problems 2) Low speed jeweling ability 3)well balanced 4) Relatively light weight 5) I like the colors, they match my business card.
Click to expand...

I just checked and HD has it... There is no way to get around your validating the importance and like for the makita.
I have been reading about it since you mentioned it and it gets the highest marks and with its setting and adjustability its hard not to like it.

Ill see it in person sunday.
 
Wills.WindowsAndWheels said:
Well like someone else said...Makita is a good brand...ive never heard anything bad about them. Since spray guns usually run closer to 40 PSI the CFM would for sure be higher at 40 PSI than 6.1 CFM @ 90psi i think it listed. For a little 3 gallon thats a lot of CFI and i guess it really depends upon your needs.

I'm gonna get a Craftsman 26 Gallon (used) compressor this weekend i found on craigslist for like $280...and it comes with a tool kit. The CFM for that is somewhere around 5.3 @90 and a little over 6 @ 40 PSI...which is enough to run SOME spray guns ive seen. I'm only going to be doing some spraying...and dont have room for a big 60 or 80 gallon one (or money for that matter lol) so this one looks like a good fit for me. Will work good at home and if i need to take it on a job i can.

Tell us this...what do you intend to be running with the compressor? What kinds of tools etc?
Click to expand...

You have really got me thinking and rethinking now.My main goal was to run small 3 inch polishers for spot repair and headlight repair.Tire Pressure changes,air chucks and so on.I`m sure the compressor will see a few nail guns also.

I was really hoping to spray the head lights from the Sata on site.

Sounds like you are getting a nice one too.I have always used craftsman.
 
TL type S said:
You have really got me thinking and rethinking now.My main goal was to run small 3 inch polishers for spot repair and headlight repair.Tire Pressure changes,air chucks and so on.I`m sure the compressor will see a few nail guns also.

I was really hoping to spray the head lights from the Sata on site.

Sounds like you are getting a nice one too.I have always used craftsman.
Click to expand...


Ah see..id love to use a nice 3 inch polisher also...but just like you...i posted on here asking questions...and also did some research and sanders/polishers EAT UP air...im talkin 10-12 CFM minimum....so i kinda had to give up that idea. I bought myself a cordless Ryobi drill w/2 batteries for $80 from HD and the 3M headlight repair kit so i'll be using it for my headlight jobs from now on. For all the other stuff thought 6 CFM should be good enough to run those...its just sanders...and HVLP sprayers that require high CFM. So it's really up to you...being mobile means you too cant have a big guy...id say buy something that fits your needs...but also isnt gonna be too big to fit into whatever you're driving.

I figure if i ever get so much business that i NEED an air sander...i'll be able to afford either a garage..or a house with a garage to do my work in...and thus can buy a stationary compressor to supply all the power i want :)...but for now...a 26 gallon 6 CFM compressor will fit most my needs and probably last me a good long time and for the headlights..ill stick to the drill :)
 
:iagree: Skip the air sander but don't go for a battery operated drill. Use 3" sanding discs and polishing pads on...
your new 9227c :D or your DA. It'd just be so much nicer not having to worry about CFM's, have to hear the compressor running the whole time or deal with the crappy Ryobi Nicd battery's (I have 'em) running out during head light restores. Still get the compressor for all the other stuff it's good for though. :xyxthumbs:
 
I think you can pretty much get a decent headlights correction with a rotary. Buy the smallest BP for it they have. Buy spot pads for it and some good write up should come out.:)


I have the dewalt rotary the only thing I hate about it is the speed button seem to get stuck kinda hard to steered around. I was thinking in spraying wd40 is this a good idea? Any tips for this problem?


Makita rotary after reading about it you can't go wrong with one of em. You can definitely get the job done like Jon mentioned. But you also need to be more careful.


What are you planning in using the spray gun for?

"You can help create your own luck, you can make things happen through hard work and intelligence."- Donald J. Trump
 
ExoticAutoDetai said:
I think you can pretty much get a decent headlights correction with a rotary. Buy the smallest BP for it they have. Buy spot pads for it and some good write up should come out.:)


I have the dewalt rotary the only thing I hate about it is the speed button seem to get stuck kinda hard to steered around. I was thinking in spraying wd40 is this a good idea? Any tips for this problem?


Makita rotary after reading about it you can't go wrong with one of em. You can definitely get the job done like Jon mentioned. But you also need to be more careful.


What are you planning in using the spray gun for?

"You can help create your own luck, you can make things happen through hard work and intelligence."- Donald J. Trump
Click to expand...

The spray gun is or might be for headlight clearing.depends on if it is worth getting into it that deep because I have had great results with my current set up.

I also have had great results sanding the lights by hand.Much to consider.
 
A4 1.8tqm said:
:iagree: Skip the air sander but don't go for a battery operated drill. Use 3" sanding discs and polishing pads on...
your new 9227c :D or your DA. It'd just be so much nicer not having to worry about CFM's, have to hear the compressor running the whole time or deal with the crappy Ryobi Nicd battery's (I have 'em) running out during head light restores. Still get the compressor for all the other stuff it's good for though. :xyxthumbs:
Click to expand...

Well i guess you could always go for a Lithium Ion...I'll have to give a set of lights a go...Ive been using my drill on other things and it seems to last a decent amount of time..and with a back up battery it think it'll be cool...but we'll see.

TL type S said:
The spray gun is or might be for headlight clearing.depends on if it is worth getting into it that deep because I have had great results with my current set up.

I also have had great results sanding the lights by hand.Much to consider.
Click to expand...

Yeah clearing headlights would be a lot of work...if you're getting paid well enough for it ($100 a piece maybe?) then cool...but otherwise, with the time it takes i kinda just prefer the Spar Urethane seal treatment...its quick and cheap and portable but lasts a good long time (my lights are still holding up).

I think you're getting a bit like me...i wanted to have the 3" set up so bad when i first started looking into getting a compressor...but after i thought about it i realized first...id really need a BIG and STRONG compressor...and second...i do good work already with what i already have set up for specific things like...headlights...paint...interiors...etc...so do i really NEED a huge compressor right now for all those things?

If you decide to go for it, this place had a lot of options, but was just too expensive for me Shop by Air Compressor CFM @ Air Compressors Direct.com - Your Online CFM (Cubic Feet Per Minute) Air Compressor Superstore

So for me i had to settle down and exercise a little discipline and realize i didnt NEED all that right now...so instead i went and invested in a few other things that i do NEED and will make my job much easier and last me a good long time (like a power washer, work platform, E-Z up tent etc).

Hope that helps a little with your decision :)
 
Yeah clearing headlights would be a lot of work...if you're getting paid well enough for it ($100 a piece maybe?) then cool...but otherwise, with the time it takes i kinda just prefer the Spar Urethane seal treatment...its quick and cheap and portable but lasts a good long time (my lights are still holding up).

*I am getting $90.00 a set for lights,$100.00 car-$150.00 SUV for interiors depends on condition and, $150.00 car swirl remove-$300.00 for SUV swirl remove exteriors.I am getting more money back than I am spending on tools and able to think about a nice enclosed trailer soon.I am stocking up for that also.

*I am blessed to have a friend who is a incredible paint and body man and he has given me so much training as of late.I helped wet sand a Tangelo Pearl Z28 after painting and clearing and wow.Might not seem like much but to be instructed and allowed to wet sand a job he charged $16,000 on was the strong :xyxthumbs:.What a confidence builder for me.

I think you're getting a bit like me...i wanted to have the 3" set up so bad when i first started looking into getting a compressor...but after i thought about it i realized first...id really need a BIG and STRONG compressor...and second...i do good work already with what i already have set up for specific things like...headlights...paint...interiors...etc...so do i really NEED a huge compressor right now for all those things?

*I am seriously thinking on the MAC5200.Can I get away with the MAC700?

So for me i had to settle down and exercise a little discipline and realize i didnt NEED all that right now...so instead i went and invested in a few other things that i do NEED and will make my job much easier and last me a good long time (like a power washer, work platform, E-Z up tent etc).

*Yes now you have me thinking on the E-Z up tent.Was looking for something to fill this need.Thanks for throwing that in there.Been .looking at them some today and watching the Auto Auction.

Hope that helps a little with your decision :)[/QUOTE]

*Thanks to all of you who took time to post and offer your advice.A man who seeks wise council/advice is a successful man.

Thanks Everyone!!!!
 
Wills.WindowsAndWheels said:
Well I guess you could always go for Lithium Ion...I'll have to give a set of lights a go...Ive been using my drill on other things and it seems to last a decent amount of time..and with a back up battery I think it'll be cool...but we'll see.
Click to expand...

Yeah LiIon is the way to go, fortunately Ryobi made the One+ system interchangeable with both battery type's. I plan to upgrade when my NiCd's (like 2 years old) crap out.
 
You must log in or register to reply here.
Back
Top