Megs DA Microfiber

Jenn1270

Jenn1270

New member
Joined
Nov 26, 2009
Messages
1,148
Reaction score
0
While ONRing the Pilot (http://www.autogeekonline.net/forum/show-n-shine/27060-2006-honda-pilot-wash-wax.html, (old post to see the color) I realized how neglected it was and is swirled out.

I have the DA MF kit on the way and should be arriving tomorrow.

Are there any tricks I should know before I start? I watched the megs video to get the basics.

I will try and get some pics but my camera (only phone, lost the camera in the move) isn't so great.

Jenn
 
Keep pads clean between panels, keep speed down to recommended settings, spritz water on panel occasionally, and dont overload the disc with product after initial priming.
 
If you need more correction power, don't increase the speed but increase the pressure and slow down your arm speed. Keep it at the recommended OPM settings which is 4800OPM for the D300 and 3800OPM for the D301.

What D/A are you using?
 
Anyone know what dial numbers these translate to for the Megs G100 DA?
 
tapp1 said:
Anyone know what dial numbers these translate to for the Megs G100 DA?
Click to expand...

  • Speed Setting 1 - 1800 opm
  • Speed Setting 2 - 2800 opm
  • Speed Setting 3 - 3800 opm
  • Speed Setting 4 - 4800 opm
  • Speed Setting 5 - 5800 opm
  • Speed Setting 6 - 6800 opm
 
Marc08EX said:
If you need more correction power, don't increase the speed but increase the pressure and slow down your arm speed. Keep it at the recommended OPM settings which is 4800OPM for the D300 and 3800OPM for the D301.

What D/A are you using?
Click to expand...

PC XP

Does anyone know what dial numbers translate to for the opm?
 
tapp1 said:
Anyone know what dial numbers these translate to for the Megs G100 DA?
Click to expand...

G100:
Speed Setting 1 - 2300 opm
Speed Setting 2 - 2350 opm
Speed Setting 3 - 2600 opm
Speed Setting 4 - 3280 opm
Speed Setting 5 - 4780 opm
Speed Setting 6 - 6100 opm

So you can use speed 5 for the D300 compound and around speed 4.5 for the D301 finishing wax.
 
mark58 said:
Jenn1270 said:
PC XP

Does anyone know what dial numbers translate to for the opm?
Click to expand...


OPM's for PC7424XP
Speed Setting 1 - 2500 opm
Speed Setting 2 - 3300 opm
Speed Setting 3 - 4000 opm
Speed Setting 4 - 4800 opm
Speed Setting 5 - 5800 opm
Speed Setting 6 - 6800 opm

I think!

http://www.autogeekonline.net/forum...tion-polishers/33434-opm-chart-pc-7424xp.html
Click to expand...

Thanks correct Mark!

So speed 4 for D300 and speed 3 approx for the D301. Same speed dial settings as the g110v2.
 
Marc08EX said:
If you need more correction power, don't increase the speed but increase the pressure and slow down your arm speed. Keep it at the recommended OPM settings which is 4800OPM for the D300 and 3800OPM for the D301.

What D/A are you using?
Click to expand...

mark58 said:
OPM's for PC7424XP
Speed Setting 1 - 2500 opm
Speed Setting 2 - 3300 opm
Speed Setting 3 - 4000 opm
Speed Setting 4 - 4800 opm
Speed Setting 5 - 5800 opm
Speed Setting 6 - 6800 opm

I think!

http://www.autogeekonline.net/forum...tion-polishers/33434-opm-chart-pc-7424xp.html
Click to expand...

Thanks Marc

Jenn
 
You must log in or register to reply here.
Back
Top