Megs G220 and pads?

D

Dude2k

New member
Joined
Aug 29, 2010
Messages
29
Reaction score
0
hi dudes.
i have been using my g220( 220V version of the G110) for a few times trying to train my skills and i use megs soft buff 2.0 7" pads.
but my question is, are those pads to big for my litle whimpy g220? it seems to have a hard time turning the pad sometimes,
you guy´s recomend another type of pads or machine?


thanx guy´s (sorry for the spelling)
 
I wouldn't use anything larger then a 5.5 pad with a DA.Even with the newer DA's i still stick to 5.5 pads that size seems to work perfect.
 
Dude2k said:
hi dudes.
i have been using my g220( 220V version of the G110) for a few times trying to train my skills and i use megs soft buff 2.0 7" pads.
but my question is, are those pads to big for my litle whimpy g220? it seems to have a hard time turning the pad sometimes,
you guy´s recomend another type of pads or machine?


thanx guy´s (sorry for the spelling)
Click to expand...
Yes, your pads are too big, but no, your g220 is not whimpy!
Try the 5.5" pads, they work a treat! I got a g220 as well, I use LC 5.5" flat and hydrotech pads. I started out with 6.5" LC ccs ones, but they didn't want to spin when trying to correct.
 
If you use really good technique you can keep the 7" pads rotating under pressure on a G220 or any of the Meguiar's polishers but smaller pads will always rotate better because there's just plain less surface area for the tool to have to rotate.

With smaller diameter and thickness pads it requires less technique to keep the pads rotating and thus more people are able to get better results faster and easier.

Pick up a 5" backing plate and some 5.5" pads, either the Flat OC, CCS OC or Hydro-Tech CC pads all work great, probably the best all around pads are the simplest and that's the 5.5" Flat Open Cell Foam pads.


Read through this... the tips and techniques apply to any DA Polisher, first generation or second generation and even any pad size...

How to maximize the ability of the 1st Generation Porter Cable Dual Action Polishers

LOTS of pictures in the above thread of pads and backing plates in a way you can easily get an idea of size...

The outer edge of the face of these pads is tapered so they are actually a little under 5" in diameter
5_5FlatPads02.jpg




The above article is under Dual Action Polishers in my article list...


:)
 
You must log in or register to reply here.
Back
Top