Menz 85 RD

[WEST SIDE]

My paint is in good shape but was looking to get a little more pop,would i get any results by just using Menz 85RD and if so which pad should i use

 

[tenzin]

Results will depend on which pad but no matter what pad, you wont get much cut if any using 85rd, since its a finishing polish. VERY POPULAR.

Flat pads: black or blue
Lake Country 5 1/2 x 7/8 inch Beveled Edge Foam Pads, buffing pads, Lake Country curved edge pads, polishing pads

CCS: gray, blue
CCS 6.5 inch foam pads, Lake country ccs foam pads, porter cable pads, ccs polishing pads, ccs pads, lake country ccs pads

 

[CEE DOG]

Yes, you will get more pop. For your use I would suggest Crimson HT pads.

If you don't like HT pads then the Gray (aka black) flat pads

 

[rwright]

Yes, you will get more pop. For your use I would suggest Crimson HT pads.

If you don't like HT pads then the Gray (aka black) flat pads

x2 :xyxthumbs:

 

[sohail99]

Can we use PO85RD with a white polishing pad?

To get that extra pop I was thinking of M205 with white LC CCS pad and then PO85rd with another white pad!

should I use a gray pad for PO85RD?

 

[SATracker]

I suggest you try the Menz 85 RD with both the Gray LC & Crimson pad. Sometimes I like to look I get from the gray but, at other times, the gray just doesn't do it & I use the crimson.

 

[CEE DOG]

Can we use PO85RD with a white polishing pad?

Yes you can.

To get that extra pop I was thinking of M205 with white LC CCS pad and then PO85rd with another white pad!

should I use a gray pad for PO85RD?

In this situation I would go grey with the PO85RD but you should really find this out in your test spot