Menz FG500 straight to SF4000??

J

jimbob

New member
Joined
Dec 28, 2014
Messages
73
Reaction score
0
Hi all, been detailing my gf's car which is in terrible condition. Heavily swirled with many isolated scratches and scrapes.

Planning on using FG500 on a Flex and LC hybrid blue light cutting pad. My question is whether the SF4000 has enough cut to clean up any holograms after this? Or do I need to use IP2000 before SF4000? I've got the hybrid black finishing pads and white pads at my disposal.

Other polishes I have are optimum compound, polish and finish.

Thanks
 
jimbob said:
Hi all, been detailing my gf's car which is in terrible condition. Heavily swirled with many isolated scratches and scrapes.

Planning on using FG500 on a Flex and LC hybrid blue light cutting pad. My question is whether the SF4000 has enough cut to clean up any holograms after this? Or do I need to use IP2000 before SF4000? I've got the hybrid black finishing pads and white pads at my disposal.

Other polishes I have are optimum compound, polish and finish.

Thanks
Click to expand...

So a few things here. One, you are using the wrong pad setup. FG400 is a cutting polish and blue pads are for a last step jeweling process with FG4500

You would want to use FG400 with a minimum of white most probably orange/tangerine. I'd read this article and the comments, then re-read it so you are clear on how to get the most out of Menzerna.

http://www.autogeekonline.net/forum...rning-3401-menzerna-products-hybrid-pads.html
 
medicscott said:
So a few things here. One, you are using the wrong pad setup. FG400 is a cutting polish and blue pads are for a last step jeweling process with FG4500

You would want to use FG400 with a minimum of white most probably orange/tangerine. I'd read this article and the comments, then re-read it so you are clear on how to get the most out of Menzerna.

http://www.autogeekonline.net/forum...rning-3401-menzerna-products-hybrid-pads.html
Click to expand...
In the Hybrid line, the blue is a light cut pad. But in the flat line, they are wax pads
 
You are correct. Blue Hybrid pads are light cutting. Based on your description of the condition of your GF's car, you might want to use the Orange Hybrid cutting pad with FG400 instead of the Blue pad. It will correct a lot faster and still finish well enough that the SF4000 will clean up anything left behind.
 
MIsnowman said:
You are correct. Blue Hybrid pads are light cutting. Based on your description of the condition of your GF's car, you might want to use the Orange Hybrid cutting pad with FG400 instead of the Blue pad. It will correct a lot faster and still finish well enough that the SF4000 will clean up anything left behind.
Click to expand...


Hi there, yeah my preference would have been the orange cutting pad but I don't have any at my disposal. My current set up was originally intended for my own vehicle and I would have NEVER allow things to get to like her condition :D
 
Yes, SF4000 on white has more than enough pull in it to finish out what your first step leaves behind.

3401, White Hybrid, and SF4000 has enough pull in it to remove what the PE14, Hybrid wool, and SC300 leaves behind.
 
I really am sick of all these different pads...why can't the colors ALL mean the same thing? Griots, Lake Country, Rupes, Hex Logic and BuffnShine...get your acts together and make the colors all the same, it's too much to remember for us
 
Mike@DedicatedPerfection said:
Yes, SF4000 on white has more than enough pull in it to finish out what your first step leaves behind.

3401, White Hybrid, and SF4000 has enough pull in it to remove what the PE14, Hybrid wool, and SC300 leaves behind.
Click to expand...


Seems like a versatile product. Will need to make sure I always have some on hand!!
 
You must log in or register to reply here.
Back
Top