I got this product a while back and now probably a good time came to use it. The paint condition is medium swirls, no scratches. I tried to gather an info or reviews, but not much written about particular product. Can someone advice on which pad, speed, working time and how does it perform in comparison to M205 or Meg's UC. I have in my arsenal B&S orange, green and blue pads, also, no brand, but bought from the AG finishing pads.
Menzerna 2400 (SI1500) need advice
- Thread starter VeloNYC
- Start date
Stevedotmil
New member
- Feb 3, 2013
- 118
- 0
Hit up their website for recommended usage and pad combinations. Try it on a test panel with different combos of pad aggressiveness to see what works. Start with a polishing pad and work your way to compounding pad to figure out the results you want. Don't go too fast on the speed or you will shorten the working time. It works for a pretty long time on the right speed setting before the product starts to break down. Make sure you do an IPA wipe to get all the product off of the surface when checking your work. Finishes better than M205 depending on the pad you decide to use with almost no dusting. Good luck.
The PF2400 is their liquid polish. It's for the dry oxidized clearcoats and SS paint that are oxidized. But it works as a medium cut polish on every paint. Just be carefull when you start to polish so it don't sling all over the place LOL. Not much of polish is needed as with most Menzerna polishes.
/ Tony
/ Tony
WRAPT C5Z06
New member
- Nov 12, 2009
- 12,615
- 0
It's a good polish, better than PF2500, IMO.