Menzerna Chart

what product of menzerna should i use to remove severe swirl, water spots, bird droppings on audi a4 '98 that haven't been polished and waxed in 10 years?
 
xmutan said:
what product of menzerna should i use to remove severe swirl, water spots, bird droppings on audi a4 '98 that haven't been polished and waxed in 10 years?
Click to expand...

Menzerna Power Gloss (10/10)
Menzerna Intensive Polish PO85RD3.02 (7/10)

I would think one of these 2 would do the job in the menzerna product line.
 
Re: Final polish 11

mparker30 said:
I just received my polish order from another site. Sorry AG I should have waited. Just wanted to know is what is the diff between final finish 1 and 2? Also I am doing my first detail this sat. I have the final poish 2 and their glaze. I am also waitig for the intensive polish. So in the meantime I ordered the advance swirl remover from pinnacle and orage ccs pads. I am doin a 02 explorer with swirls. I plan on using the pin with the orange pad and then the final polsh 2 with the green pad. How does that sound?
Click to expand...
From what I have been reading (somone correct me if I am wrong) but the ceramic polish is almost too much for regular clear. Menzerna makes non ceramic clear polish, but the 106ff is more for the European cars.



___________________
 
Menzerna told me you can polish ceramic clears and regular clears, no problem. The ceramic abbrasives (are round) are more expensive to produce. That's why they also make polishes for non-ceramic clear coats.
The diffrence between P85RD (Final Finish) and 106FA (nano finish) is the AMOUNT of the SAME abbrasives. 106FA contains more than 85RD. They are both ceramic clear safe. 106FA was intended as a single stage polishing product, not multi stage. It cuts just a bit more but still gives the same finish. This comes from Menzerna directly, not from someone else on a forum.
 
what polish would you guys use to correct minor micro-marring, and minor holograms to finish down LSP ready? (And not loaded with filllers)
 
can someone make a thread and explain the new naming system
 
thanks ,,
Can you add the abreviated name/numbers that everyone uses for each product?,
:dblthumb2::Picture:
 
Glad to know about this chart but i professionally do this work in my workshop for the shining matters of many cars.I like it .Some points re adding in it and its a little bit different from my chart.So nice to add more points to my chart.I like it.:xyxthumbs:
 
If no one's seen this a colorful chart found on the Menzerna page may also benefit some.


menzerna-chart-2013.jpg
 
Its so simple to understand.If you are a mechanic so its easy to understand otherwise its difficult for you these are all polish compounds. Scoott representing a chart of its different types,why you get confused of it?
 
Extremely helpful. Lets hope AG updates their product chart to avoid some confusion. As an example, they show Power Finish and Medium Cut Polish as the same thing (PF2500). Thanks for posting that.
 
You must log in or register to reply here.
Back
Top