menzerna ip vs. sip

[Lumadar]

can u use 106ff and of its not enough just go to IP or does 106ff have almost the same cutting ability?

I use this chart for reference: Menzerna Polishing Compounds Products, menzerna polishes, menzerna car polish, menzerna nano polish, menzerna final polish, menzerna compound,

 

[TOGWT]

See also Menzerna 'sticky'

CeramiClear is PPG developed paint for M-B vehicles, a very hard 'scratchless' paint finish

 

[jmark]

So what about Nissan clearcoat. Will PO106FF work with a Flex XC 3401 and a white pad? I am thinking of using either FPII or PO106FF.

 

[94LT1]

I use this chart for reference: Menzerna Polishing Compounds Products, menzerna polishes, menzerna car polish, menzerna nano polish, menzerna final polish, menzerna compound,

i use the chart as well but iv never seen any one use IP and 106ff together

 

[Lumadar]

So what about Nissan clearcoat. Will PO106FF work with a Flex XC 3401 and a white pad? I am thinking of using either FPII or PO106FF.

I just did a full paint correction on a BLACK 350z on Wednesday using (This will blow your mind) a LC foamed wool pad and 106ff. It averaged 3 passes, but took as many as 6 in bad areas to fully remove the swirls which were quite horrible.

The foamed wool pad actually FINISHED 100% marring/scratch/haze free. It wasn't my gameplan going into it, but it blew my mind to see how well it finished in that combo.

I topped it off with a coat of #21 2.0 by Meg's. I have pics that I will try and upload if you would like to see the results.