Mercedez Benz S550 luxurious hacked by prior delivery detailer - rescue by KC

[kc's]

I am very fortunate again, counted worthy to help my friend to detail her luxurious ride.

she wouldn't have sent to any detail but waited for me till my convenience
she know what she want , the level of prefection

my apologies for the delay...here goes the rest of the story

A luxurious Merz S 550 , they got this ride fully imported (recondition unit) just over 1 year old.

This ride really caught my sight, and remind me as i have been maintaining my uncle previous S series. Great luxurious looking Ride......

But under proper lighting......erchhhhh...arghhhhhh......

swirls & later sent to a wrong hand..it got buffing trails (AKA HOlograming)

another paid to wack Job

in the worng hand
this is what happen when it ended with a person with the wrong technic, marring the paint

led torch is good to shine our hologramming

halogen light is good shine out swirls

look at the damage

there are 3 isssue here
the swirls caused by improper techniques & material use
2ndly it was sent to detail instead the clear coat get burnt
3rdly the pad could be dirty or the detailer did not wash & clay prior detailing...look at the round deep scratch..even rounded scratched

pay pay attention to the hologram
every pic depicts diffrently

different strokes

more

 

[kc's]

inner compartment aat the gloove area

clay

severely wacked prior delivering to the new onwer, onwers of such ride, usually has driver to chauffer them around & maintain their ride....
i believe this car came with lots of swirls which damaged due to improper washing, prior delivering to the new owner, they agent might have sent to detailing
guess what they got...free HOLOGRAMMING

another wack by detailer......buy 1 free 1

the existing swirls was not eliminted but adding value added service & certain parts


For body corrections, swirls & rids...i used Makita rotary LakeCountry wool pad with Meguiars M#105 speed 1 to spread & speed 3 / 3.5 to correct
a multiple passes on different area

Then step down to Makita rotary with Meguiars Cutting pad with Meguiars M#105 speed 1 to spread & speed 3 to polish

Polish with Makita rotary LakeCountry CCS polishing pad with Meguiars M#205 speed 1 to spread & speed 2 to polish & speed 1 to finish

finishing Polish with Makita rotary meguiars polishing LakeCountry CCS Glazing blue pad with Meguiars M#205 speed 1 to spread & speed 2 to polish & speed 1 to finish

Then Meguiars NXT sealant wax...
Ultimate Quick Detailer on all windows

Meguiars Aloe leather cleaners on all seats

Meguiars Gold class vinyl on all vinyl & dash & trims

Meguiars Glass Cleaner on all windows & glass
1st 50/50 % comparrision area set

tad a

before

after

2nd 50/50 % comparrision pics

look at the before dullness & after brightness
before look like grey more than black

wack by the detailer

ta da, look at the before & after

eliminated & corrected

extreme close up pic before & after

before

after M 105 2 passes with wool, ticks is still visible & later corrected further

 

[kc's]

inner compartment aat the gloove area

clay

severely wacked prior delivering to the new onwer, onwers of such ride, usually has driver to chauffer them around & maintain their ride....
i believe this car came with lots of swirls which damaged due to improper washing, prior delivering to the new owner, they agent might have sent to detailing
guess what they got...free HOLOGRAMMING

another wack by detailer......buy 1 free 1

the existing swirls was not eliminted but adding value added service & certain parts


For body corrections, swirls & rids...i used Makita rotary LakeCountry wool pad with Meguiars M#105 speed 1 to spread & speed 3 / 3.5 to correct
a multiple passes on different area

Then step down to Makita rotary with Meguiars Cutting pad with Meguiars M#105 speed 1 to spread & speed 3 to polish

Polish with Makita rotary LakeCountry CCS polishing pad with Meguiars M#205 speed 1 to spread & speed 2 to polish & speed 1 to finish

finishing Polish with Makita rotary meguiars polishing LakeCountry CCS Glazing blue pad with Meguiars M#205 speed 1 to spread & speed 2 to polish & speed 1 to finish

Then Meguiars NXT sealant wax...
Ultimate Quick Detailer on all windows

Meguiars Aloe leather cleaners on all seats

Meguiars Gold class vinyl on all vinyl & dash & trims

Meguiars Glass Cleaner on all windows & glass
1st 50/50 % comparrision area set

tad a

before

after

2nd 50/50 % comparrision pics

look at the before dullness & after brightness
before look like grey more than black

wack by the detailer

ta da, look at the before & after

eliminated & corrected

extreme close up pic before & after

before

after M 105 2 passes with wool, ticks is still visible & later corrected further

 

[kc's]

going

gone

this was my choice of Pad combinations

if anyone can tell u they can do it with just one....alone..he is either a superman or lone ranger

next ,moving to M205 polishing

ta da

mirror shines

interior before
dull & stains

stains seats

ta da after condition by Meguiars gold class aloe Leather conditioner

ta da

now u dont

now u see

ta da

rear seats

mirror shinning

a perfect german marke now

a mirror shinning

Meguiars slogan in the show off section

"It ain't braggin' if you can back it up." "Dizzy Dean"

 

[kc's]

remember before

now

ta ta ...my friend

thanks for viewing again:top::top::top:
cheers

 

[kc's]

remember before

now

ta ta ...my friend

thanks for viewing again:top::top::top:
cheers

 

[rohnramirez]

Great job on the silver arrow! You're really good with a rotary.

 

[jjkacz]

That's looks amazing - Great work!!

 

[kc's]

Great job on the silver arrow! You're really good with a rotary.

thanks buddy

prefect practice makes prefect

just a little patience & plenty of passion brought me here


:xyxthumbs::xyxthumbs::xyxthumbs::xyxthumbs:

That's looks amazing - Great work!!

Thank you sirrops:rops:rops:

 

[SRHTX]

Poor MB. I know that black color was not easy since the Mercedes have thick clear coats on them.

Very nice save bud!! rops:

 

[CEE DOG]

Amazing work kc! Another entertatining write up as well. That first 50/50 shot almost made me fall out of my seat!

 

[Tom Weed]

Great job and nice write up. The before and afters were amazing... How many hours do you have on polishing this thing out?

 

[DirtsAway]

Nice! I can't believe how bad those swirls were. Good thing the clear coat is so thick on those German cars, not sure you could have salvaged the paint so well on a Ford... Then again, I doubt anyone would ask you too either

 

[kc's]

Poor MB. I know that black color was not easy since the Mercedes have thick clear coats on them.

Very nice save bud!! rops:

verily verily i say unto
black is a colour will make owner insane

& at the same time making other jealous of your looks

the issue here is not thick coat but hard ceramics coat

so hard & difficults to remove any swirls


have u ever tries to polish glass???? LOL giving u the same feel

 

[SRHTX]

have u ever tries to polish glass???? LOL giving u the same feel

Nope. Lucky ME!!!!

 

[kc's]

Nope. Lucky ME!!!!

LOL

i will send u some then:dblthumb2::dblthumb2::dblthumb2::dblthumb2::dblthumb2:

cheeers

 

[kc's]

Amazing work kc! Another entertatining write up as well. That first 50/50 shot almost made me fall out of my seat!

thanks you sir for your kind words...initially my friends says pls get my interior detail & ext wax wil do

....she says ..".this is a better car i brought, as compared to rest of my car"
as i detail all their cars....i reckon it will be easy piece of Golf

but under 300 watt Halogen
TADA....my enemy swirls up


p/s mummy says never open a can of worms

Great job and nice write up. The before and afters were amazing... How many hours do you have on polishing this thing out?

Thanks Tom weed...for your kind words
about 15 hours

Nice! I can't believe how bad those swirls were. Good thing the clear coat is so thick on those German cars, not sure you could have salvaged the paint so well on a Ford... Then again, I doubt anyone would ask you too either

there is good & bad thing on hard coat...good is that it has more resistance...bad when it is damaged....it is very hard to correct

thats the issue of hard paint

just like slicing ice with your skates

 

[tuscarora dave]

Very nice work indeed.:dblthumb2:

 

[SRHTX]

LOL

i will send u some then:dblthumb2::dblthumb2::dblthumb2::dblthumb2::dblthumb2:

cheeers

No thanks. I'm trying to put detailing vehicles to the side, kinda, to work on my new training, Clear Bras. If my clients want me to detail thier vehicles, then, they will have to pay my normal rates that I've posted, to them, in the past. rops: Im the MAN

 

[kc's]

Very nice work indeed.:dblthumb2:

thanks

tuscarora dave for your kind words

No thanks. I'm trying to put detailing vehicles to the side, kinda, to work on my new training, Clear Bras. If my clients want me to detail thier vehicles, then, they will have to pay my normal rates that I've posted, to them, in the past. rops: Im the MAN

congrats buddy......wow....i am too interested