Microfiber Cleaning

VT, on that link they have that green MF applicator. I have the same and they looked the same. I used BF MF wash ~ 3 to 4 oz and it did not come out clean, not even close :(

Any recommendations?
 
No Bleach or Fabric Softener. Wash with like towels only
 
Many swear by boiling in vinegar (2oz. to a pot), then washing as normal. I haven't tried it yet, but will soon.

I also find it beneficial to always do a second rinse cycle. Seems to help. Oxyclean works well too. Just throw a scoop into the wash in addition to detergent.
 
Use some for wheelwells and other areas that won't get original clean, they'll get clean using the above mentioned process. I've used xmt pad cleaner then washed with dawn and hot water prior to the wash machine, remember no fabric softner.
 
OK thanks for the tips got to try some of these tactics.
 
No Bleach or Fabric Softener.
...

:whs: This is fundamental: softeners destroy the MFs unique ability to wipe without damage to the surfaces.
Wash with hot water (above 60º C - 140 F), use a basic powder detergent.
 
VT, on that link they have that green MF applicator. I have the same and they looked the same. I used BF MF wash ~ 3 to 4 oz and it did not come out clean, not even close :(

Any recommendations?

Whats the product and what was the towel used for? I have tested 4 or so MF washes and BF and CG never failed.

IF its tough stain use a APC first.

Here is my review of BF wash, no apc was used.

http://www.autogeekonline.net/forum/product-reviews/54301-bf-microfiber-wash.html
 
we just wash our in the clothes washer with cheap detergent (like not $15 Tide) and used the liquid softener just like you would your clothes. then dry them in the clothes dryer with a couple dryer softening sheets. they come out extremely clean, pretty much like new (some of them exactly as new, as long as you havent used them with dressing or grease or tar etc... never had any problem with them scratching or streaking at all. and some of mine have been washed hundreds of times cause we wash them nearly everyday.
 
Is BF safe to use in a HE washing machine. It's the only one that doesn't say it in the description..

Yes it is. It is low foaming, unless you use alot. You can always throw in a extra rinse cycle:xyxthumbs:
 
we just wash our in the clothes washer with cheap detergent (like not $15 Tide) and used the liquid softener just like you would your clothes. then dry them in the clothes dryer with a couple dryer softening sheets. they come out extremely clean, pretty much like new (some of them exactly as new, as long as you havent used them with dressing or grease or tar etc... never had any problem with them scratching or streaking at all. and some of mine have been washed hundreds of times cause we wash them nearly everyday.

Wait what.....:confused:

Do they still absorb water?
 
For very soiled MF towels I will hand wash in the sink with a little detergent. I think this step is crucial to to both preclean and to avoid cross contamination when I throw it in the machine.

After that they go in the machine with only MF towels and some MF cleaner (i've used Griots and CG and they both work fine)
 
big bull: they still work very well at absorbing water. BUT- we dont really use MF's for anything like that . we use chamois to dry the car and chamois to clean the interior, mainly cause they are already wet so when you hit the dash/door panles/console with the cleaner, the chamois does a great job of cleaning it. just rinse it out often. I started doing that years ago one day when I didnt have any clean rags and ive done it ever since. i like it a lot better plus there is no left over lint/dust to deal with. but, i think im the only person ive ever seen do this, lol. but it works well. we really just use MF's for wax removal, glass, door jambs, but nothing super dirty. I let the chamois do the dirty work. we have all sorts of chamois for each type of job. clean ones for outside all the way to nasty ones for pre-cleaning door jambs (again - no lint left behind).
 
Be very careful using the wash machine for very soiled or oily towels, it'll leave a ring at the water level, if you do a load or regular clothes it'll transfer to them. Don't ask how I found this out.
 
haha, yeah I wash them at the shop and of course we have a designated washer and dryer for shop use. we gave up on the ring thing a long time ago. when you wash nasty rags and towels all day every day, the washer gets ugly really quick. but no, dont wash them at home, or least dont let her know about it :-) buy plenty of rags to last a while then take them to the laundry mat instead.
 
I haven't tried any dedicated MF detergent yet, only Charlie's Soap. So far it hasn't let us down. Excellent for spot removal also.
 
VT, on that link they have that green MF applicator. I have the same and they looked the same. I used BF MF wash ~ 3 to 4 oz and it did not come out clean, not even close :(

Any recommendations?


If you look closely at the photos, the mf's are indeed clean, and from my viewpoint, they are stained as well. Take a mop for instance. It spends it's worklife in a solution of cleaning agents. If it is lucky, it may get a rinse before being hung out to dry. After many uses it will become stained, grey, and stiff. Yet it still performs as expected.

My first post pretty well answers your dilema.

You guys are enthusiasts. You purchase and enjoy multiple products of every caliber. The only wax that I employ is OCW. I don't buy, nor use mf applicators. Not even for OOS application. I don't value my mf's. They are tools that are well maintained, yet sorted by condition for particular use.

baknforth101 is a business owner that employs a staff of employees. He knows what works for his business. His regimine is that of a production shop. Quick, simple, cost efficient, and effective.

Nothing written in these few sentences is meant as derogatory. I hope that no one takes offense. Just stating what I see.
I'm just a saddle tramp that details for income.




Happy detailing...:autowash:
 
Back
Top