Minor scratching with clay bar
- Thread starter buddiiee
- Start date
wdmaccord
New member
- Jun 20, 2013
- 1,278
- 0
Not unusual, especially on black. Likely picked up some contaminants and spread them around a little bit before you switched to a clean surface. This is one reason I always plan to polish after claying, but especially on black. More likely to happen on softer paints too.
Dr_Pain
New member
- Nov 28, 2012
- 2,196
- 0
If you are not happy with the results then evaluate the technique and the tools. You may need a better lubricant, a finer clay, a little less pressure, a more frequent re-application of lubricant, may need to do a IronX decon first (not to drag small iron particle all over), may need to do a light quick pass then ONR the panel and do a more thorough second pass.......
The list goes on and on.............. BUT I NEVER plan on claying without doing a light polish after, especially on a dark vehicle. Micro marring on soft paint is almost inevitable.
The list goes on and on.............. BUT I NEVER plan on claying without doing a light polish after, especially on a dark vehicle. Micro marring on soft paint is almost inevitable.
refreshauto
New member
- Feb 19, 2014
- 1,158
- 0
:iagree:
2old2change
New member
- Jan 3, 2007
- 1,269
- 0
All the above posters are dead on . Remember clay is a abrasive material and some micro marring will appear no matter how careful you are. Being a black or dark colored car only magnifies this to you eyes IMO.
- Thread starter
- #6
What is IronX decon and ONR?
Dr_Pain
New member
- Nov 28, 2012
- 2,196
- 0
IronX decontamination is a process by which you use chemicals to degrade the iron based particles that may have embedded themselves in the clear (ie. brake dust etc..). Using IronX to decontaminate the paint helps prevent you dislodging those pesky iron bits and dragging them all over the paint (until you fold them in to your clay).
Iron X Iron Remover, CQuartz IronX, Paint Cleaner, paint decontamination
ONR is an acronym for Optimum No-Rinse, which is a rinseless product that can be used as a stand-alone rinseless wash, can be diluted as a quick detailer or clay lubricant. Awesome product!!!
Optimum No Rinse Wash & Shine: clay lubricant, optimum rinseless wash, no rinse car wash, optimum detailing products
Paul A.
New member
- Dec 21, 2007
- 5,276
- 1
While you're looking budiee, i will be adding a nanoskin glove to my next order. It replaces clay but does the exact same thing. The good thing about it, for me, is that it is reuseable and if dropped, you simply hose it off (although another good thing about that is because it's a mitt i most likely won't drop it!). Simply lube it the same as you would clay.
Iron X then followed by a nanoskin treatment will get my paint even better!
And while i agree with DrPain, owning a black car myself has proved ALWAYS subject to minor marring after a clay treatment. I have tried every trick in the book to prevent it but it is inevitable for me. I always do a light buff out after every clay session...about twice a year.
Iron X then followed by a nanoskin treatment will get my paint even better!
And while i agree with DrPain, owning a black car myself has proved ALWAYS subject to minor marring after a clay treatment. I have tried every trick in the book to prevent it but it is inevitable for me. I always do a light buff out after every clay session...about twice a year.
builthatch
New member
- May 25, 2008
- 2,352
- 0
also OPT has the fine grade Opti-Eraser.