More CQuartz Questions

R

rjk512

New member
Joined
Mar 20, 2016
Messages
20
Reaction score
0
Hi everyone,

I posted a while ago with some CQuartz questions and now I have a few more...

First off - from what I understand coating over it with wax would sort of inhibit the hydrophobic properties of the coating and what not, so I've decided against that... However, is it safe/recommended to use spray detailers? I have one in mind - CG V7 spray detailer, but I'm curious for all detailers including Meguiar's spray detailers.

I'm also curious about washing with CQuartz UK. Can I use any car wash soap (I use Meg's Gold Class) or is there any preferred type of soap?

Also, can CQuartz UK be clayed?

Thanks

RJ
 
rjk512 said:
Hi everyone,

I posted a while ago with some CQuartz questions and now I have a few more...

First off - from what I understand coating over it with wax would sort of inhibit the hydrophobic properties of the coating and what not, so I've decided against that... However, is it safe/recommended to use spray detailers? I have one in mind - CG V7 spray detailer, but I'm curious for all detailers including Meguiar's spray detailers.

I'm also curious about washing with CQuartz UK. Can I use any car wash soap (I use Meg's Gold Class) or is there any preferred type of soap?

Also, can CQuartz UK be clayed?

Thanks

RJ
Click to expand...

You can use spray wax/sealant products but the same issues are there as with wax. You lose the properties of the coating a little bit while that spray product is on.

CarPro offers the spray sealant Reload for use with cquartz.

As for wash I've used many types of wash soap on friends and family coated cars. They recommend to use CarPro reset soap for washing and after trying it I have converted over. Leaves a super fresh glossy surface that looked to me, to be cleaner and glossier than other soaps.

It's ok to use a fine clay on the coating but keep in mind it is abrading the surface when you do it which can affect how long the coating may last. You may want to just use tar x and iron x to chemically decontaminate the finish instead and see if you get the results you are looking for.
 
Maintenance:

When washing always use a dedicated car shampoo and wash mitt. we recommend washing with IronX Soap Gel.
Remove bird droppings from the paintwork as quickly as possible to avoid damage to the coating. Cquartz will protect from those for the first day or two, but not long term.
Avoid using automatic car washes.
Use our Reload spray sealant to maintain the coat for longer lasting time.
 
rjk512 said:
Hi everyone,

I posted a while ago with some CQuartz questions and now I have a few more...

First off - from what I understand coating over it with wax would sort of inhibit the hydrophobic properties of the coating and what not, so I've decided against that... However, is it safe/recommended to use spray detailers? I have one in mind - CG V7 spray detailer, but I'm curious for all detailers including Meguiar's spray detailers.Reload would be a compatible spray sealant.

I'm also curious about washing with CQuartz UK. Can I use any car wash soap (I use Meg's Gold Class) or is there any preferred type of soap? If you don't want any wax or polymers to interfere with the hydrophobicity of CQuartz, you can use Reset..leaves nothing behind.

Also, can CQuartz UK be clayed? ThanksYes, but who knows how much of the coating you are removing.

RJ
Click to expand...
:props:
 
rjk512 said:
Hi everyone,

I posted a while ago with some CQuartz questions and now I have a few more...

First off - from what I understand coating over it with wax would sort of inhibit the hydrophobic properties of the coating and what not, so I've decided against that... However, is it safe/recommended to use spray detailers? I have one in mind - CG V7 spray detailer, but I'm curious for all detailers including Meguiar's spray detailers.

You are correct in no need to wax over. If you want a tad extra pop and more slickness, top it with CarPro Reload or Hydr02. As for spray detailers, it is not necessary honestly. I do personally use Ultima Waterless Wash + as a spray detailer/drying aid on many cars coated with CQuartz Classic, UK, & Finest.

I'm also curious about washing with CQuartz UK. Can I use any car wash soap (I use Meg's Gold Class) or is there any preferred type of soap?

Stay away from Wash & Wax soaps as well as brush car washes. You really need to look into rinseless car washing. Its an absolute breeze with a coated car.

Also, can CQuartz UK be clayed?

If absolute necessary. Why do you ask?

Thanks

RJ
Click to expand...

See bold answers.
 
Reset works very well and plays nice with other brands of coatings as well. I apply if during the drying phase. Very nice product.

For soaps I use Reset, and Gyeon Bathe+. Regular soaps can end up not working well as the waxes, and or polymers can make it look like a hazy film.

For rinseless I am also using Ultima, and although it has polymers, it does seem to work well.

I think the best result is using Reset though.
I have heard of some using Meguires D114 for a water less but havs not tried that yet.
 
Thanks for the replies everyone.

My only issue with the Reset shampoo is that it's 30 bucks a liter, and I tend to wash pretty often... Which is why I usually use Meg's Gold Class shampoo (no wax, just wash shampoo). I guess from what everyone's saying it's a matter of seeing what works well, but Reset definitely seems to be the best out there. I have a CG microfiber mitt so using brushes won't be an issue.

The only reason I ask about detailers is because I usually wipe down with one after washing, and would like to keep doing that. I understand that spray waxes are obviously out of the question but I wanted to keep using some sort of detailer that wouldn't leave much behind. Another question about reload, which I plan to use - when is the best time to apply it? I don't plan on getting the truck wet within the recommended 24 hours or whatever the cure time is, so when should it be applied?

I ask about claying just because I usually clay every few months and I know this product lasts about a year. So I was very curious to see what I could do about surface contaminants during that time.

I will look into rinseless washes, I never thought about that, but seems like a great idea for a coated vehicle.
 
rjk512 said:
Thanks for the replies everyone.

My only issue with the Reset shampoo is that it's 30 bucks a liter, and I tend to wash pretty often... Which is why I usually use Meg's Gold Class shampoo (no wax, just wash shampoo). I guess from what everyone's saying it's a matter of seeing what works well, but Reset definitely seems to be the best out there. I have a CG microfiber mitt so using brushes won't be an issue.

The only reason I ask about detailers is because I usually wipe down with one after washing, and would like to keep doing that. I understand that spray waxes are obviously out of the question but I wanted to keep using some sort of detailer that wouldn't leave much behind. Another question about reload, which I plan to use - when is the best time to apply it? I don't plan on getting the truck wet within the recommended 24 hours or whatever the cure time is, so when should it be applied?

I ask about claying just because I usually clay every few months and I know this product lasts about a year. So I was very curious to see what I could do about surface contaminants during that time.

I will look into rinseless washes, I never thought about that, but seems like a great idea for a coated vehicle.
Click to expand...


The cool thing about Reset is you need very little, it goes a long way. I just use a cap full for 3 gallons.

I use Reload as I dry. I spray per panel, maybe a couple on larger panels like a hood, and the water just falls off, it hates water. Then you have dried the car and applied the detail in one step. It can also be applied any time the paint is clean.
 
Interesting...

Thanks for the replies. I appreciate it.
 
I am not a fan of Reload. Some people have reported streaking (not me), my problem was after using Reload the beading and sheeting all but disappeared. I contacted CarPro and they told me to contact the seller (PBMG). That was not the answer I was looking for. I hope your experience with Reload is better than mine. I think I will try Pinnacle Black Label Coating extender which is similar to reload. They also sell a QD just for coatings.
 
My 2013 Adrenaline Red Viper is CQuartz'd. I've found that Megs 34, and Adams Detail spray are the two that really play nice with it. I don't wash the car, it is in my garage. It has been caught in the rain, but the two products I just mentioned clean it right up again.

I do have Reload, and I use it here and there on the Viper. Where I have been using it is on my 2016 Blue Streak Pearl Ram 1500. It does take a little practice, but I've got the hang of it, and have amazing results. Don't need a lot of product. Lightly mist, and then LIGHTLY go over with a super plush microfiber. Stand back, and look for streaks. If you see any, go back over lightly until they are gone. Small panels at a time, and I think you'll like what you see.
 
My 2013 Adrenaline Red Viper is CQuartz'd. I've found that Megs 34, and Adams Detail spray are the two that really play nice with it. I don't wash the car, it is in my garage. It has been caught in the rain, but the two products I just mentioned clean it right up again.

I do have Reload, and I use it here and there on the Viper. Where I have been using it is on my 2016 Blue Streak Pearl Ram 1500. It does take a little practice, but I've got the hang of it, and have amazing results. Don't need a lot of product. Lightly mist, and then LIGHTLY go over with a super plush microfiber. Stand back, and look for streaks. If you see any, go back over lightly until they are gone. Small panels at a time, and I think you'll like what you see.
 
You must log in or register to reply here.
Back
Top