VP Mark
New member
- Jul 12, 2012
- 2,451
- 0
[FONT="]I get a lot of interesting calls sometimes. Another detail that was beyond nasty.[/FONT]
[FONT="]The weather was way too cold for extraction on this detail, so I had to make do with my Tornador Black and Steam. Process was as follows:[/FONT]
[FONT="]Vacuum[/FONT]
[FONT="]Air Agitate with Tornador[/FONT]
[FONT="]Tornador cleaned hard surfaces using APC+ 1:10[/FONT]
[FONT="]Steam cleaned interior hard surfaces [/FONT]
[FONT="]Dressed hard surfaces using Optimum Protectant Plus (this was the last step before windows)[/FONT]
[FONT="]Presoaked carpets with Folex[/FONT]
[FONT="]Tornador cleaned carpets with CG Fabric Clean 1 oz in 32 oz Tornador bottle along with 2 oz. APC+. You will see why this was necessary in the pictures.[/FONT]
[FONT="]Steam cleaned carpets[/FONT]
[FONT="]Cleaned seats with APC+ 1:10, nylon brush. [/FONT]
[FONT="]This van had 124k+ miles on it, so the goal was just get it clean and deal with the biological hazards.[/FONT]
[FONT="]Here we go!...[/FONT]
[FONT="]Yuck, but nothing epic. Just really dirty.
[/FONT]
[FONT="]Aaaaandd, it begins. Dog Puke. Lots of it.[/FONT]
[FONT="]
[/FONT]
[FONT="]Some misc. items in the center console.[/FONT]
[FONT="]
[/FONT]
[FONT="]Dusty.[/FONT]
[FONT="]
[/FONT]
[FONT="]Barely visible is all the trash under the seats. I filled half a 30 gallon trash bag with all of it. This was after it had been “emptied out”, haha! [/FONT]
[FONT="]
[/FONT]
[FONT="]Same pic after.[/FONT]
[FONT="]
[/FONT]
[FONT="]Driver’s side floor board after. Pic came out fuzzy.
[/FONT] [FONT="]
[/FONT]
[FONT="]This looks better! Some of the plastics had some staining that could not be removed.[/FONT]
[FONT="]
[/FONT]
[FONT="]Where the dog puke was. Not great lighting in this pic but you could not even tell it had been there.[/FONT]
[FONT="]
[/FONT]
[FONT="]Another pic of dog puke section afterwards.
[/FONT]
[FONT="]Dash looks much better![/FONT]
[FONT="]
[/FONT]
[FONT="]Thanks for looking! Please keep the comments respectful, it was just a dirty van with some dog puke. [/FONT]
[FONT="]The weather was way too cold for extraction on this detail, so I had to make do with my Tornador Black and Steam. Process was as follows:[/FONT]
[FONT="]Vacuum[/FONT]
[FONT="]Air Agitate with Tornador[/FONT]
[FONT="]Tornador cleaned hard surfaces using APC+ 1:10[/FONT]
[FONT="]Steam cleaned interior hard surfaces [/FONT]
[FONT="]Dressed hard surfaces using Optimum Protectant Plus (this was the last step before windows)[/FONT]
[FONT="]Presoaked carpets with Folex[/FONT]
[FONT="]Tornador cleaned carpets with CG Fabric Clean 1 oz in 32 oz Tornador bottle along with 2 oz. APC+. You will see why this was necessary in the pictures.[/FONT]
[FONT="]Steam cleaned carpets[/FONT]
[FONT="]Cleaned seats with APC+ 1:10, nylon brush. [/FONT]
[FONT="]This van had 124k+ miles on it, so the goal was just get it clean and deal with the biological hazards.[/FONT]
[FONT="]Here we go!...[/FONT]
[FONT="]Yuck, but nothing epic. Just really dirty.
[/FONT]

[FONT="]Aaaaandd, it begins. Dog Puke. Lots of it.[/FONT]
[FONT="]

[FONT="]Some misc. items in the center console.[/FONT]
[FONT="]

[FONT="]Dusty.[/FONT]
[FONT="]

[/FONT]
[FONT="]Barely visible is all the trash under the seats. I filled half a 30 gallon trash bag with all of it. This was after it had been “emptied out”, haha! [/FONT]

[FONT="]
[FONT="]Same pic after.[/FONT]
[FONT="]

[FONT="]Driver’s side floor board after. Pic came out fuzzy.
[/FONT] [FONT="]

[FONT="]This looks better! Some of the plastics had some staining that could not be removed.[/FONT]
[FONT="]

[FONT="]Where the dog puke was. Not great lighting in this pic but you could not even tell it had been there.[/FONT]
[FONT="]

[FONT="]Another pic of dog puke section afterwards.
[/FONT]

[FONT="]Dash looks much better![/FONT]
[FONT="]

[FONT="]Thanks for looking! Please keep the comments respectful, it was just a dirty van with some dog puke. [/FONT]
