Need help with PC and TSR 3.0

I will. Thank you for the advice. I have been wondering all night if maybe i wasnt breaking the polish down all the way. I sure thought i was but maybe i will let it go a little longer just to see what happens. Before i would stop shortly after it began to make the ripples with the polish the had clear splotchs in it. I thought this meant the polish was drying out. Can anyone confirm this?
 
Alright guys. I have an update. I decided to give the tsr and orange pad one more shot. I took it and applied at least twice the pressure i was before and worked it extremely slowly until there was virtually nothing left. After 2 passes I am happy to say almost everything was removed except for a few RIDS here and there which you need the halogens to see anyway. Now i am looking for advice one more thing. I have XMT 360 and the finishing glaze 3.0. Should i use the finishing glaze with a polishing pad and then top with my wax or should i use the 360 instead of the finishing glaze and then top with my wax. If i should use the 360 what pad should i use? Also my car is white.
 
You must log in or register to reply here.
Back
Top