ThirdgenTa
New member
- Nov 3, 2010
- 225
- 0
I will be placing an order soon and will need the opinions from some of you experienced detailers.
I've been detailing for about a year now. I mostly did wash, clay a pain cleaner and sealent. (I used some products from a local detail shop and also some off the shelf products) Also vacuum and dress the interior. I've luckily found this forum about 4 months ago and am trying to learn everything I can.
I bought a used porter cable at the end of last year and don't have much experience on it. I have a few vehicles I can practice on though.
Basically what I'm looking for are products that are fairly easy to use but produce good results.
1. Pads for my porter cable w/ 5inch backing plate. I'm not sure what size to get. It came with 4 inch lake country pads but they rotate weird probably because they are too small.
2. What kind of cutting compound is easy to work with and produces good results? I was thinkin m105/m205 but I've heard it can be hard to work with sometimes.(as far as removal and that it may fill in swirls)
3. Sealent/wax- Thanks to BobbyG's post I am leaning towards menzerna powerlock and also some collinite 845.
4. Carpets/ floor mats- I've been reading about apc but I don't know which one is good and what dilution ratios for interior cleaning. (I was using my bissell pro heat and various carpet cleaners and I was not happy with the results.
5. Also exterior dressing for plastic, trim and running boards.
I think that's all for now. I look forward to your suggestions.
I've been detailing for about a year now. I mostly did wash, clay a pain cleaner and sealent. (I used some products from a local detail shop and also some off the shelf products) Also vacuum and dress the interior. I've luckily found this forum about 4 months ago and am trying to learn everything I can.
I bought a used porter cable at the end of last year and don't have much experience on it. I have a few vehicles I can practice on though.
Basically what I'm looking for are products that are fairly easy to use but produce good results.
1. Pads for my porter cable w/ 5inch backing plate. I'm not sure what size to get. It came with 4 inch lake country pads but they rotate weird probably because they are too small.
2. What kind of cutting compound is easy to work with and produces good results? I was thinkin m105/m205 but I've heard it can be hard to work with sometimes.(as far as removal and that it may fill in swirls)
3. Sealent/wax- Thanks to BobbyG's post I am leaning towards menzerna powerlock and also some collinite 845.
4. Carpets/ floor mats- I've been reading about apc but I don't know which one is good and what dilution ratios for interior cleaning. (I was using my bissell pro heat and various carpet cleaners and I was not happy with the results.
5. Also exterior dressing for plastic, trim and running boards.
I think that's all for now. I look forward to your suggestions.