Need Some Input's From The Vet's In Here.

3

303_dc5

New member
Joined
Feb 8, 2007
Messages
5
Reaction score
0
I'm new in here. Ever since i've seen how some of the people in here detail there cars, i've been hooked on this site. here's my question?? From experience, has anyone used both the poorboys swirl remover's and the xmt swirl remover's. if you have, then which one is the better of the 2 products. i just want to here what people perfer from there experieences if you have any with the 2 products.
 
303_dc5 said:
I'm new in here. Ever since i've seen how some of the people in here detail there cars, i've been hooked on this site. here's my question?? From experience, has anyone used both the poorboys swirl remover's and the xmt swirl remover's. if you have, then which one is the better of the 2 products. i just want to here what people perfer from there experieences if you have any with the 2 products.
Click to expand...
They are both great products, about the same cutting power (XMT3=SSR2.5, XMT2=SSR2, XMT1=SSR1), with Pinnacle being on top. Pinnacle is easier to work with as it leaves no dust. Poorboy's dusts a little.
 
I have only used Poorboys and can honestly say that I've been very pleased with it. Some people complain about dustin, but I believe this is mostly due to too much product being used.
 
I haven't used either, but don't leave out DP's SSR, or Pinnacle Twins.. both high-quality stuff. Most importantly, it works. :)


I've had good luck with Optimum and DP's.





-Nick :cheers:
 
I have used both lines and you can not go wrong with either line. What I will say is if you buy the XMT line be sure to purchase the pad conditioner and the pad cleaner and they both excellent products.
 
supercharged said:
They are both great products, about the same cutting power (XMT3=SSR2.5, XMT2=SSR2, XMT1=SSR1), with Pinnacle being on top. Pinnacle is easier to work with as it leaves no dust. Poorboy's dusts a little.
Click to expand...

:iagree: You can't go wrong with either, but I give the edge to the XMT series as those polishes dust less than the Poorboy's SSR line up.
 
PB's has an edge in agressiveness. Because they have PB's #3 SSR which is a bit above XMT #3.
 
supercharged said:
They are both great products, about the same cutting power (XMT3=SSR2.5, XMT2=SSR2, XMT1=SSR1), with Pinnacle being on top. Pinnacle is easier to work with as it leaves no dust. Poorboy's dusts a little.
Click to expand...

I've had the same results as supercharged. PB's does a lot but has the same cutting ability as XMT. I believe XMT3 has more than PB's 2.5. XMT does not dust and is sun friendly. Even on black. Here is one that I did with XMT3.

DETAILING082506080.jpg

DETAILING082506081.jpg

DETAILING082506082.jpg

DETAILING082506086.jpg


Then done....
DETAILING082506093.jpg

DETAILING082506087.jpg
 
Both are great lines, and you can not do wrong with either, but having both on shelve I still find that XMT is the natural choice. Not as much dust ...
 
thanks for your input's everyone. i think i'm gonna go with the xmt series.
 
Probably have not heard this before, but I'm new here. Three quickies; (just got an '07 Toy. Avalon in blizzard pearl) do I need to wait any length of time before detailing and, are products paint-color specific or do they all work on any color? I notice lots of abbreviations, is there a glossary of these on the site?
 
You must log in or register to reply here.
Back
Top