New from Central NJ with a side gig (RAGS2Gloss Detailing).....pic heavy

R

Ryan@RAGS2Gloss

New member
Joined
Nov 28, 2013
Messages
10
Reaction score
0
Hey guys long time reader of the forums but finally decided to register and make my first post lol. My name is Ryan and i have a little side gig called RAGS2Gloss Auto Detailing doing some of the local show cars and race cars in my area. Not nearly on the level of the majority on the boards here but getting better and better as i go i feel. here are some pics of my previous work. I also am a race car junky myself as i own a buick grand national making a little over 1000HP and was featured in january of last years GM high tech performance magazine. Thanks for the awesome board!!!

Mach 1 before and afters







Custom 2008 srt charger





2003 mustang cobra





64 bonneville





1962 buick







1955 chevy bel air





1996 impala ss 600hp






Custom air bagged 1992 s-10 show truck





And of course my own personal ride




 
Some good looking rides there fellow Jerseyite.I like the 59-60 Impala dash in the S-10.And of coarse the 55 and your GN.I have the same rear in one of my 57`s and yes it`s a GOV-LOCK.
 
Mine is a 6.0 i built in my garage. car was driven to the track on 93 octane and with me in it weighs 3700 lbs and went 9.2 at 154 leaving soft. shooting for mid 8's this year lol
 
Welcome to AGO. Very nice introduction topic, you've done high quality work on all of that vehicles. Your pictures almost speak for themselves, thank you for that.

Why don't you tell a little about what you use most (polisher / polishes), etc...? I'm interested in knowing.


Kind Regards.
 
thanks for the kind words.....as for products i like the hd product line for its polish, all in one and sealant. i use m101 for cutting. i use 845, hd poxy as my sealant. i have a GG 6" and 3" with multiple pads from foam to microfiber. most of the bad cars i go m101 on a cutting pad, hd polish on a polish pad, then hd speed on a finishing pad. then either 845 or hd poxy. slowly expanding trying out different products.
 
Ryan@RAGS2Gloss said:
thanks for the kind words.....as for products i like the hd product line for its polish, all in one and sealant. i use m101 for cutting. i use 845, hd poxy as my sealant. i have a GG 6" and 3" with multiple pads from foam to microfiber. most of the bad cars i go m101 on a cutting pad, hd polish on a polish pad, then hd speed on a finishing pad. then either 845 or hd poxy. slowly expanding trying out different products.
Click to expand...

Thanks for that. Again, keep on the nice work!

Kind Regards.
 
Welcome! Great job on some nice rides!
 
You must log in or register to reply here.
Back
Top