NEW XMT Series By Pinnacle

Can you buy other products and get the deal or is this
for xmt buyers only. I could spend $75.00 easy but I
need different products.
 
So if the XMT like a economical line of product for Pinnacle. Big price difference.
 
Mike T said:
So if the XMT like a economical line of product for Pinnacle. Big price difference.
Click to expand...

Pinnacles original line is still the "fine wine" of choice. It wins shows and can make the difference between 1st and 2nd place. But using the best ingredients and hand pouring the wax costs $$.

XMT is a cost conscious line of products, that had to live up to the Pinnacle of reputations before branding with the name. Max took it very seriously and kept pricing as low as possible to compete and surpass other lines with similar pricing. Try it .... inevitably there will be comparisions with Finish Kare, Chemical Guys, Poorboys, Adams, Stuf, and alot of other products but I think if you give the line a fair shot, you just might like them.
 
Last edited:
Oh I fully intend on trying it. I was just curious. I didn't mean economical has cheap product, just a little sacrificed for cost.
 
XMT Finishing Glaze on Mach 1

Jason: couldn't stand the pressure! I tried the XMT Finishing Glaze on a portion of the Mach 1 (had to keep it in the garage due to the rain).

1. Used XMT Pad Conditioner. GREAT PRODUCT. One quick spray on a dry pad, then apply XMT Finishing Glaze and it's off to the races.
2. XMT Finishing Glaze. While the Mach is the show car, I did notice a very nice glow after using the product on portions of the car. My best results were with the pc set on 4 for an even spread. Wipe off was effortless. After 3 + years of showing the car, I can tell the small differences on products used. This product is fantastic IMO. The metallic "jumps out" and the gloss is liquid.

As soon as I can get the car outside, I'll finish it off and get some decent pics.

Here is one from the garage that shows the gloss and the metallic pop.

XMT_Finishing_Glaze.jpg


Totoland Mach
 
Another shot of the Mach (zero sunshine). The flash picks up the metallic pop with the XMT Glaze while the front of the hood shows the gloss.

XMT_Finishing_Glaze_Hood.jpg


The pics are posted in the Autogeek Gallery under my name.

Totoland Mach
 
Here's another shot from the garage. As soon as the sun peeks out in Totoland, I'll try to get some better shots. I think these shots show the gloss and depth of XMT Finishing Glaze.

XMT_Finishing_Glaze_LowerRear.jpg


Totoland Mach
 
FloridaNative said:
Very impressive!! That's it!! I'm getting a PC!
Click to expand...


What took you so long ?????????????????????? (j/k) Its funny, my wife would rather go shooting and use a pistol then touch a car buffer. But then again she still doesnt understand why I needed a new one (Hitachi Rotary) when PC works well. Wait till I tell her that I got my eye on a Cyclo after Dennis's review. :eek:
 
Scott I bet as long as you keep her car shining, she wont have much to say! :p
 
XMT Light Swirl Remover Kit

I purchased the LSRK and was pleased with the product. I am a big fan of Pinnacle products and like the all in one kits. There was, in my opinion, a glaring error. In the handy instruction sheet, step one was lubricate the pad with pad conditioner. Hey, no conditioner in the kit! I used Pinnacle Crystal Mist which I have used in the past with the PC so there was no real problem. It is just annoying that there was not even a little 2 or 4 oz. bottle in the kit. It would be nice to include all the parts listed in the instructions for the Novice User.
 
Ay I was looking at the cyclo too! AG is killing me!! Too many great products! Now I don't know which to get. But I am definitely getting a machine buffer it is amazing the results obtained with them. Please post your thoughts on the cyclo when you get it. Take care



killrwheels@autogeek said:
What took you so long ?????????????????????? (j/k) Its funny, my wife would rather go shooting and use a pistol then touch a car buffer. But then again she still doesnt understand why I needed a new one (Hitachi Rotary) when PC works well. Wait till I tell her that I got my eye on a Cyclo after Dennis's review. :eek:
Click to expand...
 
Jason...
How much pressure did you apply when using #3 with the yellow pad? Did an awesome job on the swirls!

Did I read that you used it in direct sunlight/heat on black?
AWESOME!

I'm a mobile detailer and I need something like this!

Justin
 
hey i think the kit only comes with the cleaner and the conditioner you have to add in....i think
 
justin30513 said:
Jason...
How much pressure did you apply when using #3 with the yellow pad? Did an awesome job on the swirls!

Did I read that you used it in direct sunlight/heat on black?
AWESOME!

I'm a mobile detailer and I need something like this!

Justin
Click to expand...

Just a few pounds not so much, and yes the black Mazda was done outside in the hot 90 degees south florida weather.
 
im new to detailing and i but the light swirl removal kit.all i can say is it works great.i started with xmt#2 then went to #1 and it came out better then i expected.i still have some small scratches to get out....probably should have used #3 which i also bought,but after 6 hours i was beat tired.my hood roof and trunk looked as bad or worse then the toyota hood.sorry no pic,s the camera is broke,as soon as i get a new one ill post em up.
 
redg35 said:
im new to detailing and i but the light swirl removal kit.all i can say is it works great.i started with xmt#2 then went to #1 and it came out better then i expected.i still have some small scratches to get out....probably should have used #3 which i also bought,but after 6 hours i was beat tired.my hood roof and trunk looked as bad or worse then the toyota hood.sorry no pic,s the camera is broke,as soon as i get a new one ill post em up.
Click to expand...
Glad you had great results, make sure you try the glaze out too!:applause:
 
One question guys, whats better, the XMT-Serie from Pinnacle or the Meguiars polishes #82, 83, 84 ??
 
ahh ... I say XMT !!! I am sure the guys will agree.
 
Bulla2000 said:
One question guys, whats better, the XMT-Serie from Pinnacle or the Meguiars polishes #82, 83, 84 ??
Click to expand...

I've used all of these. I started out with the Meg's and soon found out that they do NOT work in the sun. So I soon recieved some XMT to test and try out. WOW! Huge difference. I constantly use the entire line of XMT. The cut and correction is awesome. No dusting either.

With this saild, Meg's still has a place in my arsenal. I will soon be purchasing a rotary and the Meg's will be used with it but indoors only. Also, Meg's is very good on single staged paints due to it's nourishing oils.

Overall, you cannot beat XMT.
 
You must log in or register to reply here.
Back
Top