No Rinse Wash & Shine

BenSRT

BenSRT

New member
Joined
Jun 8, 2010
Messages
197
Reaction score
0
Hi,
somebody have try Optimum no rinse wash and shine or Detailer's Pride Rinseless Wash & Gloss in QD or clay lube??

I would like a feedback about this product it is good or not?

thanks

Ben
 
Either no rinse product is a must have. They are very versatile.
 
both are newer formulas too and offer more gloss and lubrication than the original versions.
 
so,thanks guys,I try both products!!:props:
 
when you may your mix it is better to take distilled water or just take current water?
 
I just use regular water but filtered water wont hurt.
 
BenSRT said:
when you may your mix it is better to take distilled water or just take current water?
Click to expand...

I personally use distilled water when using ONR and other concentrates that require mixing with water. I find that it seems to work better. Depending on your locale you can have high hardness, pH, calcium and floride to name a few in you water. Various members have mentioned that the coloring fades when they mix ONR with regular tap water and they have experienced other problems when they use their water, but I personally have not found that with distilled water. If you have access to filtered water vs distilled, it all depends on you. You could test it. One batch distilled and one batch regular tap water. Your preference. What works for you.
 
MI Mike said:
I personally use distilled water when using ONR and other concentrates that require mixing with water. I find that it seems to work better. Depending on your locale you can have high hardness, pH, calcium and floride to name a few in you water. Various members have mentioned that the coloring fades when they mix ONR with regular tap water and they have experienced other problems when they use their water, but I personally have not found that with distilled water. If you have access to filtered water vs distilled, it all depends on you. You could test it. One batch distilled and one batch regular tap water. Your preference. What works for you.
Click to expand...
I agree 100%. I add 3 oz ONR to 29 oz DW and find it works great on running boards as well as a spot cleaner. Running boards arent slippery like after a UV dressing.
 
Question: Can you use the DP Rinseless Wash & Gloss in a foam cannon and then just wipe it down? Remember, there are no stupid questions...
 
Indeed ONR is a must have!

Welcome to AG, I'm also from Quebec, Canada :caflag:
 
gumbedamit said:
Question: Can you use the DP Rinseless Wash & Gloss in a foam cannon and then just wipe it down? Remember, there are no stupid questions...
Click to expand...

By doing so your wash media would get dirty and not have a change to get cleaned like it does when using a bucket when you rinse out your wash media after washing a panel.
 
gumbedamit said:
Question: Can you use the DP Rinseless Wash & Gloss in a foam cannon and then just wipe it down? Remember, there are no stupid questions...
Click to expand...

I'll try it and let you know. Of course the Cobra 530 that I'll use to wash will be rinsed in a bucket after each panel.
 
You must log in or register to reply here.
Back
Top