O....m....g....

[alko]

So I'm now polishing my car with the Wolfgang twins, well...I'm only on the TSR 3.0. I did a test spot, first using a LC CCS orange pad. It finished well but it took for-ev-ver to break the polish down. On the opposite side of the tape line, I used a tangerine LC Hydro pad. OH MAN!!! this is a winning combination! Now I only wish I had crimson hydro pads! HHHMMMM...maybe I can trade my 6" MF discs for some...that is if someone wants to trade ;-) Hope ya'll are having a great weekend! I'll post pics when I'm done!

 

[Chris's FX4]

Can't wait to see the results.:xyxthumbs:

 

[MedicBMC]

Great to hear! LMK how it goes and maybe I'll give your combo a try instead of UC.

 

[Fast Eddie]

The LC hydro tangerine pads are some of my favorite pads lake country makes.

 

[alko]

Can't wait to see the results.:xyxthumbs:

Chris...I'll be sure to take pics. I'm about to pull the car out of the garage now to check my work. I'll take before pics of the spots I didn't polish yet and after.

The LC hydro tangerine pads are some of my favorite pads lake country makes.

Man...I had these sitting in my bin for awhile now. I bought them when I got the Poli Seal...wasn't that impressed with that combo. I will give it another chance though.

 

[Flash Gordon]

icture:

 

[embolism]

I take it you are now sold on the difference btw flat pads and ccs when it comes to DAT polishes?

 

[Flash Gordon]

icture:

 

[alko]

I take it you are now sold on the difference btw flat pads and ccs when it comes to DAT polishes?

ABSOLUTELY! BUT as I love these pads, I can tell these things don't last long and they gum up real easily. I find myself having to clean the pads after every other section, and I'm being careful not to over saturate the pad with product. I would also feel the pad to see how much product is covering it. Using pads has reaffirmed my love for a foam pad versus the Meg's MF pads.

icture:

I will Flash...I couldn't get any decent before pics as the camera I was using isn't that great. I didn't have alot deep swirls but I did have marring from the clay. I'm no where near done. Hopefully I'll be done next weekend. I need to do the front bumper, rear bumper, and left side of the vehicle for the TSW. Then I'll have to apply the finishing glaze and then the wax.

 

[flyinion]

So I'm now polishing my car with the Wolfgang twins, well...I'm only on the TSR 3.0. I did a test spot, first using a LC CCS orange pad. It finished well but it took for-ev-ver to break the polish down. On the opposite side of the tape line, I used a tangerine LC Hydro pad. OH MAN!!! this is a winning combination! Now I only wish I had crimson hydro pads! HHHMMMM...maybe I can trade my 6" MF discs for some...that is if someone wants to trade ;-) Hope ya'll are having a great weekend! I'll post pics when I'm done!

Cool to hear. I ended up ordering a set of LC flat pads after all the issues I had with CCS on my car a couple months ago and realizing the CCS pads were sabotaging me. Haven't had a chance to use the new pads yet but I assume they'll behave similarly.

 

[alko]

Cool to hear. I ended up ordering a set of LC flat pads after all the issues I had with CCS on my car a couple months ago and realizing the CCS pads were sabotaging me. Haven't had a chance to use the new pads yet but I assume they'll behave similarly.

I ordered some Gray CCS pads but I may see if I can exchange them for some HT pads. I absolutely love these pads. I don't know if I need a different backing plate, but one thing I'm seeing is that the pads are starting to collapse in the middle.