OK to leave 845 on?

So just squeeze some out onto a applicator, spread around with finger and you're good to wax like you would a paste on an applicator?
You are using too much product. Only a few drops are required.
 
So just squeeze some out onto a applicator, spread around with finger and you're good to wax like you would a paste on an applicator?

Yes. And just use very small amount of the 845 and apply it very thin. When it drys, you'll see how such a small amount can be spread out on the surface
 
Last edited:
Applied two coats over this past long weekend using the small yellow foam wax applicator. After a waiting period, wiped it off with Cobra's blue microfiber towels.

Ditto :xyxthumbs:

By hand using the yellow foam pads (actually on sale right now). The cleaner/smoother the surface, the easier it is to use. I literally used 3 drops...one...two...three...and got to waxing. On a 2008 Accord, 3 drops would cover the trunk lid, the back of the car and the C-pillars.

No wasps though.
 
Will do guys.

I personally have the CCS Euro Red Foam applicators.. the oval shaped ones
 
Will do guys.

I personally have the CCS Euro Red Foam applicators.. the oval shaped ones

This has been said on other threads. To allow better control over how much you use change bottle cap to flip top type or transfer 845 to squeeze bottle.
 
Back
Top