Open House Detail Day at Autogeek - Saturday, January 4th, 2020

  • Thread starter Thread starter Mike Phillips
  • Start date Start date
M

Mike Phillips

Guest
Open House Detail Day at Autogeek - Saturday, January 4th, 2020


BYOC - Bring Your Own Car

Bring your own car - work on your own car!
Be sure to bring a few of your friends to help you!

RUPES_01_030.JPG




When?
On Saturday, January 4th we're going to start the year with an Open House or "Open Garage" detailing day where you are welcome to bring your car to Autogeek's Show Car Garage to have it professionally inspected and diagnosed by Autogeek's trained staff.


On hand will be,

  • New products introduced at SEMA
  • New tools introduced at SEMA
  • Member's from the IDA to share what the IDA is all about.



Starting at 9:00am on Saturday, January 4th, here at Autogeek in Stuart, Florida there will be an Open House Detailing Day where you are invited to bring your own car and learn how to work on your own car.

Autogeek’s trained staff will be on-hand to inspect and diagnose your car to show you how to do-it-yourself to restore your car to factory fresh condition.

There will be classes on,

  • Ceramic coatings
  • Paint correction
  • Steam machines
  • Glass polishing
  • Plastic trim restoration
  • Headlight restoration etc.


You will also have the chance to use tools from FLEX – RUPES – Griot’s.


A car wash station will be set-up so you can test out,

  • Foam Guns with BLACKFIRE Foam Soap
  • Wolfgang SiO2 Coating Wash
  • BLACKFIRE Clay Mitts & Towels
  • SONAX Wheel Cleaners
  • Plus - how to machine scrub tires and apply a tire COATING







VIP Guest!

Our special guest will be Aaryn Nicholson from New Zealand Aaryn is a long-time friend and customer of Autogeek and alumni member of our 3-day Detailing Bootcamp Class. Aaryn is one of the most respected detailers in New Zealand and is the owner and operator of his own detail shop. He's a wealth of knowledge and happy to answer any questions you might have about detailing in general, running a detailing shop are even what it's like to detail all the cool cars they down in New Zealand!


Aaryn_001.jpg






Questions? [email protected]



:)
 
Continued...


If you're attending this event, please reply to this thread or call our customer care staff to get your name on the sign-up list.


1-800-869-3011


Thank you and we'll see you here!



:)
 
I'm not sure what is the coolest part of this event.

The detailing, or the fact Aaryn will be there!

Let's call it a close one with Aaryn winning by a nose. Lol


Another very cool AG event.
 
Wonder what it would cost to ship me and my '66 to Stuart, FLA ? :laughing:
 
Hey Mike, sign me up, I'll be there. I'm looking forward to trying out the 3401 on my car.

Add a "plus one" for me, I'll drag my neighbor along with me.

Jerry O'Brien
 
Mike Phillips said:
Continued...


If you're attending this event, please reply to this thread or call our customer care staff to get your name on the sign-up list.


1-800-869-3011


Thank you and we'll see you here!



:)
Click to expand...

You know what! It’s so very exciting that for once I can actually say -

SIGN ME UP MIKE!!! :buffing:

This is cooler than I can explain, I’m unsure I am worthy of the VIP status but I can tell y’all I’m humbled to the core to be held in such high regard. Really looking forward to this & I hope to meet as many people as I can.
An absolutely huge THANK YOU to Mike & the whole Autogeek family for this generous hospitality, you guys rock. :props:


PaulMys said:
I'm not sure what is the coolest part of this event.

The detailing, or the fact Aaryn will be there!

Let's call it a close one with Aaryn winning by a nose. Lol


Another very cool AG event.
Click to expand...

You’re the Man PaulMys!! :urtheman:

I wish you could make it down to this mate.

57Rambler said:
Wonder what it would cost to ship me and my '66 to Stuart, FLA ? :laughing:
Click to expand...

Road Trip!! :props:

Vacation would be nice 57Rambler . . . Treat yourself, you’ve earned it.


Jerry0 said:
Hey Mike, sign me up, I'll be there. I'm looking forward to trying out the 3401 on my car.

Add a "plus one" for me, I'll drag my neighbor along with me.

Jerry O'Brien
Click to expand...

Awesome Jerry! :props:

I look forward to meeting you buddy. Yes! The 3401 is awesome. :buffing:


Aaryn NZ. :dblthumb2:
 
Jerry0 said:
Hey Mike, sign me up, I'll be there. I'm looking forward to trying out the 3401 on my car.

Add a "plus one" for me, I'll drag my neighbor along with me.

Jerry O'Brien
Click to expand...


Sounds good Jerry!

I'm also bringing a few of my neighbors too!


:)
 
:bump:

This is going to be a great opportunity to check out a lot of cool tools and products. Clear your schedule and be here.


Car wash station will be set-up so you can wash your car and use cool tools like the Foam Gun!


McKees_Van_Makeover_016.jpg




:)
 
... As I sit here at 20 past 8 on a Saturday night writing this, I realise that this time in a fortnight we will have just taken off from New Zealand on our 8000+ mile journey to Florida. :xyxthumbs:

Really looking forward to it & really looking forward to hanging out with the good folks at Autogeek for this Open House Day. :buffing:


Aaryn NZ. :dblthumb2:
 
Aaryn NZ said:
... As I sit here at 20 past 8 on a Saturday night writing this, I realize that this time in a fortnight we will have just taken off from New Zealand on our 8000+ mile journey to Florida. :xyxthumbs:
Click to expand...

Dang that's a long trip.... longer than any I've undertaken.


Aaryn NZ said:
Really looking forward to it & really looking forward to hanging out with the good folks at Autogeek for this Open House Day. :buffing:

Aaryn NZ. :dblthumb2:
Click to expand...


This Saturday Open House Detail Day is coming up FAST! I think we're going to have a good turn-out so we're going to be busy!


I'll be setting up for it on Friday and we start at 9:00am Saturday morning.


:buffing:
 
Mike Phillips said:
Dang that's a long trip.... longer than any I've undertaken.


Saturday Open House Detail Day is coming up FAST! I think we're going to have a good turn-out so we're going to be busy!


I'll be setting up for it on Friday and we start at 9:00am Saturday morning.


:buffing:
Click to expand...


A long way indeed Mike. It was around the 27 hour mark with stop overs etc & certainly a tiresome journey.

Super excited for the Open House Detail Day at Autogeek, a bunch of stuff I am eager to try out, especially the FLEX PXE & XCE tools.

We have changed our plans a bit so as we can get down to Stuart on the Friday instead of leaving Orlando super early on the Saturday morning. Unfortunately I don’t think we will get there in time to help set up on the Friday I’m sorry Mike. We don’t collect our rental car until 3pm.


Aaryn NZ.


Sent from my iPhone using AGOnline
 
Aaryn NZ said:
Super excited for the Open House Detail Day at Autogeek, a bunch of stuff I am eager to try out, especially the FLEX PXE & XCE tools.
Click to expand...

There should be a good mix of people and cars here. I let the local streetrod club know.



Aaryn NZ said:
We have changed our plans a bit so as we can get down to Stuart on the Friday instead of leaving Orlando super early on the Saturday morning.
Click to expand...

Take your time... traffic is crazy on a Friday.



Aaryn NZ said:
Unfortunately I don’t think we will get there in time to help set up on the Friday I’m sorry Mike. We don’t collect our rental car until 3pm.
Click to expand...


No worries - I got this...


:)
 
bigmike2249 said:
From Pembroke Pines. So about 1.5 hours. Not too bad
Click to expand...


Gotcha - still a good drive.

Thank you for clearing your schedule and attending.

Normally AFTER events like this I get asked,

When's the next one?


If there is a next one, it will be the same time next year.


:)
 
Chervon, (they own FLEX), sent me a cordless Hammer Drill for my own use.

I've been meaning to purchase a cordless drill for cleaning wheels using the Wheel Woolies Power Woolie 12X. The key thing with a cordless tool is you cannot get shocked like you could with any tool you have to plug into a wall outlet. So thank you Chervon.

I've attached the Wheel Woolies Power Woolie 12X and anyone attending the class this weekend will have a chance to test this out on the barrels of their wheels.


Skill_Wheel_Cleaner_01.JPG


Skill_Wheel_Cleaner_02.JPG



I've used these brushes in the past and they work great as long as you have enough clearance between the inner barrel surface and your brake rotors. So naturally, it works best with larger vehicles with larger wheels.


Get yours here,

Wheel Woolies Power Woolie 12X



:)
 
You must log in or register to reply here.
Back
Top