Optimum No Rinse (ONR) Or Waterless Wash Plus+for clay lubricant?

david11g35

david11g35

New member
Joined
Mar 13, 2012
Messages
1,005
Reaction score
0
With this free shipping going on I am going to bite on a few products.

Which of these two items works best as clay lubricant? Will be using for striclty claying lube

Optimum No Rinse (ONR) Or Waterless Wash Plus+ for clay lubricant?
 
ONR. It has so many uses its incredible, not to mention that is makes an amazing clay lubricant. I dilute it 1.5 oz per spray bottle (32 oz.).
 
david11g35 said:
With this free shipping going on I am going to bite on a few products.

Which of these two items works best as clay lubricant? Will be using for striclty claying lube

Optimum No Rinse (ONR) Or Waterless Wash Plus+ for clay lubricant?
Click to expand...

Clay Lube is A waste of money... Really...
Optimum no rinse Is the best

It's great for regular clay.
Used with clay block, Works Fine too
I also used with speedy prep towel, Works Amazing!

In short, ONR... :dblthumb2:
 
I find UWW+ (ultima waterless wash plus) to have better lubricity, but the ONR is much better option pricewise.
 
I've switched to ONR totally. I've tried it with at least 4 different clays and it always does the job. FWIW I've also used ONRWW if for no other reason than just to change it up a bit, but don't see the need. What I will do though is always keep a spray bottle of (distilled) water handy. ONR as mixed for QD strength is great to have around but it just may be more ONR than you need for 'claying'. That's where after wetting the surface with ONR I can 're-wet' with water, swapping as the surface goes along. (Feeling for it grabbing and such.)
 
Haven't tried WWP but ONR is great. Good choice!
Using only as clay lube & diluting 64:1 that will last you a LONG time & cost almost nothing in the long run...
 
You must log in or register to reply here.
Back
Top