Packing up for the Autogeek Roadshow Class in Oconomowoc, Wisconsin - August 12th & 13th

M

Mike PhillipsMike Phillips is verified member.

Active member
Joined
Dec 5, 2022
Messages
51,004
Reaction score
7
Packing up for the Autogeek Roadshow Class in Oconomowoc, Wisconsin - August 12th & 13th



I know when you're sitting behind your computer or your phone or table, wondering...


Hmm... I wonder what I would get to do at an Autogeek Roadshow Class?



I've been staging tool, pads and products for this class all day and still don't have everything set out...

Wisconsin_Tools_001.JPG




Guaranteed - when you attend any of our classes there's enough of ALL the tools for everyone to have their own and get real hands-on training and hands-on experience.


Those attending this class.... you're going to have a great time!


:dblthumb2:
 
***Update***


Another full day of staging all the tools, pads and products in the garage to pack for our Roadshow Detailing Class in Wisconsin


Boxes and boxes of multiple types of microfiber towels, plus Guzzler drying towels, plus cover-up towels and even microfiber gloves.

Wisconsin_Tools_002.JPG


Wisconsin_Tools_003.JPG



RUPES compounds, polishes and pads

Wisconsin_Tools_004.JPG



RUPES tools - and lots of them....

Wisconsin_Tools_005.JPG




Camera shot from the other side of the 8' tables...

Wisconsin_Tools_006.JPG




RUPES iBrid Nano - Both Long Neck and Short Neck - SCANGRIP Sunmatch Swirl Finder Lights

Wisconsin_Tools_018.JPG




FLEX PE14 Rotary Polishers - and lots of them!

Wisconsin_Tools_007.JPG



And from the other side....

Wisconsin_Tools_008.JPG




FLEX 3401 and XFE7 Polishers and yes... LOTS of them!

Wisconsin_Tools_009.JPG




And from the other side of the tables...

Wisconsin_Tools_010.JPG



Here's the FLEX PE8 Rotary Polishers
And just so the class can feel what a FULL SIZE rotary buffer is like to work with I'll bring a Makita and a DeWALT

Wisconsin_Tools_013.JPG




Griot's 6" DA Polisher - 3" DA Polisher - BOSS 15 and 21 Long Stroke Orbital Polishers
And yes, there's a few on the table....

Wisconsin_Tools_011.JPG



From the opposite side....

Wisconsin_Tools_012.JPG



Griot's BOSS pads and products

Wisconsin_Tools_017.JPG





Scads of all the needed products...

Wisconsin_Tools_015.JPG




Tuf Shine Tire Cleaner and Tire Coating, RaggTopp, 303, Nanoskin tools...

Wisconsin_Tools_016.JPG






And a parting shot from the stage before I close down Autogeek's Show Car Garage....

Wisconsin_Tools_020.JPG




More to come on Monday, still have a few more products to stage before packing up.


This will be an amazing class! Looking forward to meeting and working with everyone who has signed up for this class.



:)
 
Outside of the tools, how much of that comes back with you? Meaning, do the students have an opportunity to buy any of the leftover products?
 
Absolutely mind boggling! I can't even comprehend the thought and planning required....

I'm having a hard time figuring out my own set-up.

Tom
 
TMQ said:
Absolutely mind boggling! I can't even comprehend the thought and planning required....

I'm having a hard time figuring out my own set-up.

Tom
Click to expand...

Everything you see in these pictures is only a portion of what we use in the 3 day class.

I pull all these tools, pads and products for the classes here and then stage them for use here instead of packing them to ship to a Roadshow location.

And "yes" setting up for either type of class requires a lot of work and focus.

Still have to get extension cords pulled andvstsged for packing and a few misc items and then everything gets shipped to Wisconsin.

:)
 
Wow. Its a never ending arsenal of tools and products. I love seeing the team unpack the boxes on competition ready. I always think to myself how nice it would be if I had access to that much stuff lol.
 
goldendodo19 said:
Wow. Its a never ending arsenal of tools and products.
Click to expand...

This is what it takes to put on a real hands-on class. This and real cars.


goldendodo19 said:
I love seeing the team unpack the boxes on competition ready.
Click to expand...

Our TV production team bcii is very creative and this was one of their ideas. bcii was the TV product team that created Overhaulin with Chip Foose for those that might not know.


goldendodo19 said:
I always think to myself how nice it would be if I had access to that much stuff lol.
Click to expand...

It's a nice perk that comes with the job but along with that perk comes a lot of responsibility.


:)
 
***Update***


I have a PRODUCTION FLEX 3" Mini Polisher here at Autogeek but I have to send it back to FLEX before Yancy and I leave for Wisconsin.

I also have a PROTOTYPE FLEX 3" Mini Polisher and I will be bring it and at least one of the Makita PO5000C polishers for everyone to test out.



Here's the Makita PO5000C and the Prototype FLEX 3" Mini Polisher staged for packing for the Wisconsin Roadshow Detailing Class

Wisconsin_Tools_021.JPG



And of course being at Lake Country we will have all the buffing pads needed to work with these two tools.



:)
 
***Update***


Extension cords are ready to go....


Wisconsin_Tools_022.JPG



Most people don't know what is required to hold a 5-Start Detailing Class. If it's going to be hands-on - then you're going to need power and a way to get the power to the tools. These are heavy duty 12 gauge 25' extension cords that we use here for our 3-day classes and also for our roadshow classes.


Ready for this --> :buffing: :buffing: :buffing: :buffing: :buffing:
 
If I ever get a chance to attend a roadshow class your going to need a couple extra guzzlers just to mop up my puddle of drool.

Are there any plans to come up to the northeast, more specifically the Boston area?
 
LSwut said:
If I ever get a chance to attend a roadshow class your going to need a couple extra guzzlers just to mop up my puddle of drool.
Click to expand...

Ha ha...


LSwut said:
Are there any plans to come up to the northeast, more specifically the Boston area?
Click to expand...


Happy to come to Boston. Happy to go anywhere we can fill a class. Your question about Boston was asked here early this morning, see post#5 and my reply in post #6


https://www.autogeekonline.net/foru...nfo-location-hotels-airports.html#post1511777



:)
 
***More***


Every roadshow class just like every class here at Autogeek - the students get to use products from ALL categories of waxes and sealants including,

  1. Cleaner/Waxes
  2. Show Car Waxes
  3. Synthetic Paint Sealants
  4. Ceramic Paint Coatings



For this class for the Ceramic Paint Coating the class will be using SONAX CC36 Ceramic Paint Coating

Wisconsin_Tools_025.JPG




You can also see Mirka Abralon 3" Sanding Discs in the background - that's for headlight restoration.

Also pictures are the Autogeek 1-quart foam guns for Sunday when we go over high quality production detailing. For this we'll be

  1. Chemically decontaminating paint
  2. Mechanically decontaminating paint
  3. Using Foam guns



All during the washing process


:)
 
have a blast wish i was attending these students are in for the time of there life!!! :( :( :(
 
Mike Phillips said:
***More***


For the Sunday class on how to do high quality production detailing, you'll be using one of the most popular one-step cleaner/waxes

3D HD Speed

Wisconsin_Tools_026.JPG



:)
Click to expand...

Love HD Speed - my favorite AIO - wonder why it's not offered in a gallon jug like other product lines?

Looking forward to participating in this class and meeting my fellow forum 'geeks' :)

David
 
You must log in or register to reply here.
Back
Top