Pads And Zip lock Bags

R

rdfkentucky

New member
Joined
Jun 10, 2012
Messages
51
Reaction score
0
Can the foam pads be stored in a zip lock bag? What I mean is if I had to leave to go eat supper, and don't have time to clean it out, can it be keep from drying out till I get back, would this be ok?
 
Sure not the best practice but it works. I'd recommend cleaning the pad on the fly with a towel or brush then reprime and continue. You can also spray some detail spray on the pad to keep it moist before leaving. Obviously the plastic bag long term storage is for fully cleaned and dry pads.
 
I do that all the time...'cept I use a BIG baggie and shove the whole thing (machine, pad etc) in it. Eat, have a beer, and resume.

Just don't leave a wet pad in a closed bag for any long period of time...can you say instant mold?

Bill
 
i punch 2 holes on each bottom corner of the ziploc bags just to let air circulate
 
if the pads are moist, wet or even damp, you shouldn't put them in a sealed ziploc bag as they will most likely grow mold over time. if they are completely dry then it should be fine...
 
If your out of pad cleaner...what's the next best thing??
 
DaveT435 said:
If your out of pad cleaner...what's the next best thing??
Click to expand...
I've switched to using Microfiber cleaner on my pads, works great! Spray on rinse off. Except on the sealant pads, they just get labeled and placed in a ziplock bag to use for the same sealant next time.
 
DaveT435 said:
If your out of pad cleaner...what's the next best thing??
Click to expand...

Dawn Power Dissolver -- spray bottle at Walmart -- $2.83 Read allot of pro detailers who use it exclusively for pad cleaning--rinses out well with no residue left behind.
 
ski2 said:
Dawn Power Dissolver -- spray bottle at Walmart -- $2.83 Read allot of pro detailers who use it exclusively for pad cleaning--rinses out well with no residue left behind.
Click to expand...

I'm not trying to start any war, and this is just my opinion. The power dissolver is very strong and harsh. If you use it get it rinsed off your pads quick or it will damage the foam in you pads. I know this because I have experienced it first hand.
It does clean pretty well .......
 
rmagnus said:
Sure not the best practice but it works. I'd recommend cleaning the pad on the fly with a towel or brush then reprime and continue. You can also spray some detail spray on the pad to keep it moist before leaving. Obviously the plastic bag long term storage is for fully cleaned and dry pads.
Click to expand...
:iagree:and I'll add that in my experience with storing foam pads in zip-loc bags, if the pads are even a little damp with water and stored/sealed for a long length of time, there is a tendency for the foam to rot and disintegrate while stored and may fall apart upon the next use of them. I mainly experienced this with soft finishing pads.
 
I think the OP wasn't talking about long term storage in a plastic bag. Just short term say if he goes in for dinner or to take a break to keep the pad from drying out.

As far as the Power Disolver--you could be right, but I know of at least 10 full time detailers who use it as their only pad cleaning method with no problems. I do rinse well and have had no problems however, I'm only doing 5-10 pads at a time since I'm just a "hobbyist" so for someone doing 20-30 pads at a time it might be too time consuming.
 
Pad experiment??

Anybody want to experiment?
One tip on painting/staining decks etc was to put the brushes or foam applicators
in a baggy and then freeze them between uses. I think they didn't even clean them, said thaw out and they are moist/ready to go.

Anyone want to try on a well worn pad and see what happens???

FYI--not responsible for any wrecked pads LOL
 
Again I don't agree. Been using DPD for years with no problems.
Buckskincolt said:
I'm not trying to start any war, and this is just my opinion. The power dissolver is very strong and harsh. If you use it get it rinsed off your pads quick or it will damage the foam in you pads. I know this because I have experienced it first hand.
It does clean pretty well .......
Click to expand...
 
Back from the dead...I'm a noob and started my first detail today. A recovery of a bad detail job by a professional.

Based on my schedule, there is no way I can finish my detail in one day. I am wondering if I could keep them in a sealed plastic Baggie in the refrigerator. I do this with paint rollers all the time. I will let them warm to room temp before using

These are the Meguiars microfiber correction kit pads.

Thank you!
 
rdfkentucky said:
Can the foam pads be stored in a zip lock bag? What I mean is if I had to leave to go eat supper, and don't have time to clean it out, can it be keep from drying out till I get back, would this be ok?
Click to expand...

Somehow, it seems the context of the question got missed by some. It appears you're were talking short term pad storage, i.e., going to eat when the wife calls, or miss out on supper.:nomore:


The answer to your question in the context you asked it is: Sure, why not (a statement and not a question). You're only going to leave the pad in the bag while you eat, or run downtown for about the same time frame. Place it in a ziplock and seal it up, then place in the shade. It should be just as you left it when you get back.


In fact, a pad moist from compound/polish/sealant/wax, provided it is sealed tightly and placed out of direct sunlight, should remain moist for 1-2 hours and perhaps longer. It's the same principle as painters doing this with brushes and rollers. If you tightly wrap Suran Wrap around a pad that is moist it can stay that way for days on end. Of course, I wouldn't recommend that because it would simply be easier to just clean the pad and put it away. But, it seems you were talking short term storage, like going to lunch or something, and you will be fine. If in doubt 1-2 sprays of a quick detailer can moisten the pad even more.
 
BigAl3 said:
if the pads are moist, wet or even damp, you shouldn't put them in a sealed ziploc bag as they will most likely grow mold over time. if they are completely dry then it should be fine...
Click to expand...


I had this happen recerntly, some APC took car of it. They were LC Flat 5.5" pads, first time it ever happend.
 
SubieMonte said:
Based on my schedule, there is no way I can finish my detail in one day.

These are the Meguiars microfiber correction kit pads.

Thank you!
Click to expand...

Just spray them with some APC and throw them in the washing machine at the end of the day. Spin them dry with your polisher and place them face down (backing side up) to dry on a grit guard or something. Minimal effort and the pads will be perfectly clean for your next use.
 
APC like Simple Green? I tossed them in the wash last night with some laundry soap. I don't think they cleaned up very well. I reprimed before starting again tonight using a Harbor Freight DA and got dust everywhere. The HFDA is more powerful than the PC7336 I have been using. Not sure if it was leftover product or if I was overheating the product. So frustrated
 
You must log in or register to reply here.
Back
Top