Paperback book - How To Detail Boats With Marine 31 by Mike Phillips

  • Thread starter Thread starter Mike Phillips
  • Start date Start date
M

Mike Phillips

Guest
Paperback book - How To Detail Boats With Marine 31 by Mike Phillips


Boat_Cover.jpg




It's no coincidence that car guys also tend to be boat guys!

The two hobbies go together well when it comes to having fun and also when it comes to detailing and maintaining both cars and boats.

This how to book contains more in-depth information on boat detailing than any other book ever written on this topic. This is without a doubt the most complete and information rich how-to book I've ever written. (I have 5 paperback how-to books in print and 3 ebooks available).

This paperback book on how to detail boats goes over every surface of a boat both inside and out. It also covers every conceivable condition a boat is in with specific steps for correction.

It covers all these tools,

Flex 3401
Flex PE14
RUPES BigFoot 21
RUPES BigFoot Duetto
RUPES TA50
Cyclo polisher
Porter Cable 7424XP
DeWALT 849X
Makita 9237CX2
Griot's Garage 6" DA Polisher
3M Air DA Sander

Working by hand
I know most people start out working by hand so I included hand techniques for every topic.


Plus all the pads, brushes and sanding discs to use with the above tool.

Instead of typing out all the topics covered in this book I've simply taken pictures of the index which shows you just how in-depth this how to book truly is...


Boat_Book_Index_001.jpg


Boat_Book_Index_002.jpg


Boat_Book_Index_003.jpg


Boat_Book_Index_004.jpg


Boat_Book_Index_006.jpg


Boat_Book_Index_007.jpg




Many of the topics covered also apply to car detailing so it's a valuable resource even if you don't yet own a boat.

If you're familiar with my writing style in the forum world you'll find the same style of writing in all my how-to books. That is I explain in simple terms how to perform a process plus why you're performing it and it's a combination of including both types of information that helps you to do the best work possible.


:)
 
Re: How To Detail Boats With Marine 31 by Mike Phillips

In this brand new how-to book I strongly recommend a number of products, tools and pads for detailing boats.

When it comes to the rotary buffer category I recommend the FLEX PE14 for a number of reasons.

It's quiet - you can listen to the radio and actually hear it.

It's lightweight.
This is important when you understand most of the boat you'll be holding the polisher up using your forearm muscles.

It's compact in size
Perfect for getting into the tight areas.

Low RPM
It offers a low of 400 RPM which is also great for doing surgical work around cleats and other components on a boat.

Well built
The extreme quality that goes into this German engineered tool isn't found in any other rotary buffer.


If you use the rotary buffer a lot you now how much more work it is to man handle as compared to any other orbital polisher. Do yourself a favor and make the work easier on you. Get a FLEX PE14

:dblthumb2:
 
just purchased a 3401 for an oxidized boat.
also ordered 7in foamed wool pads, and heavy oxidation cleaner by marine 31
would this combo work well?

Wasn't sure how many pads for boat, but ordered 3 and also 1 MF/wool hybrid pad to try
 
This has to be the most underrated post I've ever seen on here... I say that because I remember looking through the pics of the index a while back when I was up against this 28' boat.

View attachment 50988

View attachment 50989

I learned quite a bit just from studying the index.. I can only imagine how much better my experience would've been having the entire book + a Flex/rotary. I still managed great results using my G21 with a steady effort.
Thanks Mike!👍🏽
 
just purchased a 3401 for an oxidized boat.

also ordered 7in foamed wool pads, and heavy oxidation cleaner by marine 31

would this combo work well?

If the oxidation isn't too bad then it will work. The LC Purple Foamed Wool pads are good since they bring FIBERS into the cutting equation along with the abrasives in the cleaner/wax but if the oxidation is really bad then a NORMAL wool cutting pad like you would use on a rotary buffer and like I show in the book would last longer and cut better and faster.

Buffing out oxidized boats really PUNISHES pads so a really stout pad tends to take the punishment better.


Wasn't sure how many pads for boat, but ordered 3

That might get it... watch out for generating too much heat. When boats are badly oxidized the normal reaction by "us" is to have to PUSH HARDER with our polisher to cut the oxidation off the hull. Pushing over time creates heat and heat will cause de-lamination between the pad and the velcro backing. This will be the weak link with the PFWs.


Did you also get a copy of the boat detailing book?


:)
 
This has to be the most underrated post I've ever seen on here...

I say that because I remember looking through the pics of the index a while back when I was up against this 28' boat.

watermark.php


watermark.php



Nice looking finish on the gel-coat boat!



I learned quite a bit just from studying the index..

It took a few hours just to create the index. :laughing:



I can only imagine how much better my experience would've been having the entire book + a Flex/rotary. I still managed great results using my G21 with a steady effort.

Thanks Mike!


Thanks for your post... and nice work on the boat!


:)
 
:bump:


Sorry to say, at this time my boat detailing book has been discontinued.

Mike Phillips? How To Detail Boats With Marine 31


I wrote it to be the training manual for the boat class and the closest thing to actually taking the boat detailing class.




Just to note - I've been asked a lot lately about the ANNUAL boat detailing class that is ALWAYS in February.

At this time there is no Autogeek.com store page to sign-up for the February 2021 Boat Detailing Class


Detailing Classes, Florida Detailing Classes, learn how to detail



When I return to work after my vacation time off I'll work with our web department to get up a registration page so you can sign-up.


This is the MOST hands-on boat detailing class available on Planet Earth. In FACT - if you look for photo documentation showing ANY other boat class or the HISTORY of any other boat class you will not find any. When I say

Photo Documentation

I mean pictures showing people working on actual boats. Not sitting in chairs. Finding any pictures of a classroom of people working on boats will be a challenge. Finding pictures of people working on boats in a class that goes for YEARS will be impossible.


Check out this thread,

Boat Detailing Training - Before & After Pictures - The MOST DOCUMENTED HANDS-ON Boat Detailing Classes - Autogeek - Stuart, Florida



:)
 
Nooooooo!!! :( I’m sorry to see what appeared to be such a comprehensive and valuable tool discontinued (just when I need it most). For my needs, your guide makes economical sense. A class, not so much.
 
Back
Top