PC 7424 or Flex

DiPaoro

DiPaoro

New member
Joined
Feb 4, 2009
Messages
338
Reaction score
0
While I am 95% sure the PC is the way to go, what is the difference between the FLEX and PC?
 
Have you used a polisher before, if so Flex. Most all of our customers buy a PC then about 6 months later get a Flex. PC is great if you are new to polishing, but Flex makes the job much faster once you get comfortable.
 
Just like Meghan said, I bought a PC about 2 months ago, and I already want to upgrade to the Flex. Flex just has so much more correction power, and it's more comfortable to use.
 
Try looking in a pawn shop or flea market. Maybe you can get a PC dirty cheap and practice on a panel before spending on a new machine. That way you can moved up to a Flex, Cycle or a rotary.
 
I appreciate all of the responses.....
 
I DEFINITELY wouldn't start with a rotary, no matter how careful you think you'll be with it. Get familiar and comfortable with a PC or Flex, then step up to a rotary if you still need more correction power.
 
I did some research and just dont see a need to spend an extra $100+ for the flex. I plan to use the PC 1-2 times per year. If the PC takes longer....then I will have to smoke another cigar....!

My window for detailing is small.....then it's golf season!
 
veyronracer91 said:
I DEFINITELY wouldn't start with a rotary, no matter how careful you think you'll be with it. Get familiar and comfortable with a PC or Flex, then step up to a rotary if you still need more correction power.
Click to expand...

He never said he was just starting...just PC or Flex. I'm making the assumption that he's done this before, in which case don't waste your time with either of the above mentioned and just get a rotary. If the OP is just learning, get a PC...no need to spend over $200 on a DA. If you're just going to use it a couple times a year, go with the PC man...it'll be perfect for what you need.
 
Well yes, but I'd assume that most people looking to make their first buffer purchase haven't spent much time with a machine. That's why I assumed that a rotary was out of the question.
 
BigAl3 said:
get the Flex...
Click to expand...

Why would he spend the extra money for the Flex when he's only going to use it 1-2 times a year like he said? Seems like a waste of money that could be put towards polishes, etc, or perhaps some new Titleist golf balls :D.
 
joshs07redss said:
Why would he spend the extra money for the Flex when he's only going to use it 1-2 times a year like he said? Seems like a waste of money that could be put towards polishes, etc, or perhaps some new Titleist golf balls :D.
Click to expand...

if he uses it on his car, neighbors or friends, he might run into a problem where the PC may not do the job quickly enough (we all know the paint systems are different these days and it can become frustrating). who knows, he may be able to do this on the side for cash (who couldn't use some extra these days) and the Flex can tackle the job(s) more quickly as it's like the perfect balance between the rotary and PC. this will most likely be one purchase he won't regret after he's used it...

here's an excellent review on the Flex and if this doesn't do it for you (so be it then) than i don't know what will...

Detail Paradise Forums-viewtopic-Flex XC 3401 VRG Review and Testing Very Long !

MarioFlex.flv video by CDetailing - Photobucket
 
Last edited:
If you are only taking care of your personal ride(s) and do not plan on using the machine more then 1-2times save the money on the Flex and ge a PC with 4" pads. If you were to do more polishing say I would def say get the Flex it is a great machine and I sure can not wait to get mine
 
Not saying the Flex is a bad machine. I'm going by what he said. Since he stated he's only doing his cars and will only use it 1-2 times a year, the extra money spent on a Flex would be a waste. Perhaps after he starts detailing and sees that he may be doing it more, he can sell the PC and put that money towards a better polisher, and maybe by that time, he'll be ready for a rotary.
 
joshs07redss said:
he can sell the PC and put that money towards a better polisher, and maybe by that time, he'll be ready for a rotary.
Click to expand...

nah, i would keep the PC it comes in handy for carpets and applying lsp's as well...
 
You must log in or register to reply here.
Back
Top