PC plug in place of handle

PaulMys

PaulMys

Active member
Joined
Jan 14, 2014
Messages
10,772
Reaction score
3
Forgive me, fellas. I think (know) I've read this before, but damn if I can find it:

So when you remove the side handle on the PC, you need to replace it with a short plug or the shroud will come off?

This makes sense to me, and I can make (or probably have) a plug to fit, but just wanted to double-check with you guys.
 
If your date code is 2009-11 and newer you will need two metric M8 x 1.25 socket cap bolts. If your date code is 2009-10 and earlier you will need 2, 5/16 inch x 1/2 inch socket cap bolts and matching washers. If you have Mike Phillips book (The Complete Guide to a Show Car Shine) it's on page 53. Hope this is the info you are looking for.

Frank
 
Frank70 said:
If your date code is 2009-11 and newer you will need two metric M8 x 1.25 socket cap bolts. If your date code is 2009-10 and earlier you will need 2, 5/16 inch x 1/2 inch socket cap bolts and matching washers. If you have Mike Phillips book (The Complete Guide to a Show Car Shine) it's on page 53. Hope this is the info you are looking for.

Frank
Click to expand...

Well I'll be a ..............

THAT's where I saw it, dammit!!

Thanks, Frank. Appreciate it, man. :)
 
You must log in or register to reply here.
Back
Top