PCXP just arrived!

P

pokerbob781

New member
Joined
May 19, 2010
Messages
48
Reaction score
0
Hi,

I just received my entire kit from AG and had a quick question. My PC came with the original White pad that you can screw into the PC. What is this used for? I have the 5 inch plate that I will be using with LC pads.

Thanks,
 
pokerbob781 said:
Hi,

I just received my entire kit from AG and had a quick question. My PC came with the original White pad that you can screw into the PC. What is this used for? I have the 5 inch plate that I will be using with LC pads.

Thanks,
Click to expand...

That pad is junk and should not be used on your paint. I recommend tossing it in the garbage...Some will say you can use it with a MF bonnet over it, but I also do not recommend using MF bonnets...(Just my opinion)...
 
That's what I figured and I dont see people on here using a bonnet too often. I'll go in my box of extras I guess.

With my 5 inch backing plate, Do I use the plastic looking washer?
 
pokerbob781 said:
That's what I figured and I dont see people on here using a bonnet too often. I'll go in my box of extras I guess.

With my 5 inch backing plate, Do I use the plastic looking washer?
Click to expand...


If this is the one you are talking about...

IMG_02372.JPG


Yes, definitely!
 
You've probably already seen these but for any lurkers reading this thread...

How To Remove Swirls, Scratches and Water Spots using a PC 7424XP, Meguiar's G110v2 or Griot's Garage 6" Random Orbital Polisher

Using a DA Polisher - Part 1​
[video=youtube_share;zUHRnHsSXZU]- How to remove swirls, scratches and water spots using a Porter Cable DA Polisher[/video]

Using a DA Polisher - Part 2​
[video=youtube_share;fxwlWijdIxM]- How to remove swirls, scratches and water spots using a Porter Cable DA Polisher[/video]

Using a DA Polisher - Part 3​
[video=youtube_share;9objUFdpsG4]- How to remove swirls, scratches and water spots using a Porter Cable DA Polisher[/video]



Most Important...

Here's how to do a "Section Pass" when trying to remove swirls, scratches and other below surface paint defects.

How to do a Section Pass​
[ame=http://www.youtube.com/watch?v=Q70g83mnTn4]YouTube - How to do a "Section Pass" with a Porter Cable 7424XP[/video]






The Definitive How-To Article for Removing Swirls, Scratches and Water Spots Using a Porter Cable 7424XP, G110v2 or Griot's Garage Polisher


:buffing:
 
That's exactly it.

Mike, I've watched your videos many times but I think I'll watch it one more time before I try it out for the first time.

Thanks guys,
 
You must log in or register to reply here.
Back
Top