Directions:
1. Shake well.
2. Liquid Souverän should be applied to paint that's free of contaminants and previously applied waxes and sealants. Use Pinnacle Ultra Poly Clay to remove above surface contaminants and Pinnacle Paintwork Cleansing Lotion to polish the surface. This will enable Liquid Souveran to form a complete bond to the surface, enabling maximum durability and shine.
3. Very important - apply a THIN coat! Apply a Nickel size amount of wax on the applicator and wipe a thin coat of wax on the surface using a circular or back-and-forth motion. This wax is not fussy. Use a motion that you are comfortable with. The beauty of this liquid wax is that you can do sections or the whole vehicle at once.
4. Work on a cool surface, out of direct sunlight. Allow the wax to dry to a light haze and buff off using a clean, soft microfiber towel.
5.Don't hesitate to apply this wax with a machine. Use a red or blue finishing pad with your Porter Cable 7424xp. Set the speed setting between 3 and 4. Work in a back and forth, then up and down motion. There's no need to apply pressure. Buff using a microfiber towel or a microfiber bonnet over a Lambswool 6 Inch Leveling Pad.
*Multiple coats deepen the glossy, wet, 3-Dimensional look. If you choose to apply a 2nd or 3rd coat, wait 24 hours in between applications. Also, wait a day to wash after waxing.
