Post Your Beading Shots!!!

Klasse Act said:
This is one Gyeon product I just haven't gotten around to yet but I will. When you say "applied heavily" do you mean the whole bottle or double the sprays per panel/section?

Sent from my SM-G991U using Tapatalk
Click to expand...

Her car is white so I put it on really heavy just out of curiosity to see how it would hold up. I've used Wet Coat in the past and my application method was 2 sprays per panel and wipe it with my wash mitt then rinse. For her car I sprayed a LOT of product - maybe 5 - 10 sprays, then rinsed. Surprised it is lasting this long but maybe the heavier application is why?

I'm curious if Hydro2 is as good as Wet Coat. Being Carpro and Gyeon seem so similar it likely is.

I have to say I do like the spray sealants. So easy to use. And you don't have to touch the paint.
 
It’s raining today. Truck was relatively dirty as there was a film on hood from pollen/dirt etc. This is the type of post rain beading you see with 3 in 1.

If I cleaned it prior to rain, I would assume the beading would be tighter.

fbc8a2f591d82c2fc7829974cdc5584f.jpg

9287070ddf2871fe2fe2719f13e1cec6.jpg

ea4ec9cadb979ba063e63a5f82732977.jpg



Sent from my iPhone using Tapatalk
 
NJNinja said:
It’s raining today. Truck was relatively dirty as there was a film on hood from pollen/dirt etc. This is the type of post rain beading you see with 3 in 1.

If I cleaned it prior to rain, I would assume the beading would be tighter.

fbc8a2f591d82c2fc7829974cdc5584f.jpg

9287070ddf2871fe2fe2719f13e1cec6.jpg

ea4ec9cadb979ba063e63a5f82732977.jpg



Sent from my iPhone using Tapatalk
Click to expand...
Beading looks good to me but yeah, a clean slate so to speak, would have netted even tighter beads without a doubt.

Sent from my SM-G991U using Tapatalk
 
Went out and did a quick wipe down with GG RW to see how it would change the beading. Much better as expected.

5c26deb7571d8e4acfadc05b46eed748.jpg

f502680fbe5472952b04599118f90e4b.jpg

a01da5a005fc5b8c6a810e3928695113.jpg

0da05a233eb4dcec51b90b9e31ef98ec.jpg



Sent from my iPhone using Tapatalk
 
opie said:
Car cleen systems in Pa. Its local to me. Wasn't sure if i could say where since it has nothing to do with AG lol

Sent from my SM-G973U using Tapatalk
Click to expand...

Yeah long as your not super aggressive promoting or posting links it seems to be all good.


Sent from my iPhone using Tapatalk
 
Rsurfer said:
Nah, Used the new Sonax Ceramic Ultra Slick Detailer.
Click to expand...

That makes more sense. Stayed away from BSD and NPS do to application. Wasn’t into the whole mixing it diluting it as that had to weaken it.

Have you used BSD? And if so how does it compare?


Sent from my iPhone using Tapatalk
 
Coatingsarecrack said:
That makes more sense. Stayed away from BSD and NPS do to application. Wasn’t into the whole mixing it diluting it as that had to weaken it.

Have you used BSD? And if so how does it compare?


Sent from my iPhone using Tapatalk
Click to expand...

Don't like anything that is not slick to the touch. BSD is off my shelf. It's hard to beat Bead Maker for slickness, but SCUSD gives it a run for its money.

I posted the beading, ultra hydrophobic. It's a quick detailer, so I don't expect much durability. With the ceramic in it I'm hoping it will out perform Bead Maker.
 
Gtechniq CSL and EXOv4 approximately 18 months old. I'm pretty sure I have a layer of C2V3 as well.

This was after some rain yesterday. I haven't washed the car in a few weeks.

attachment.php
 
Adam's Graphene is some impressive stuff. More so than the 303 & TW, it appears.
 
NJNinja said:
Adam's Graphene is some impressive stuff. More so than the 303 & TW, it appears.
Click to expand...
My experience with TWHS spray graphene wasn't very good, application wasn't very good, maybe I got a bad bottle

Sent from my SM-G991U using Tapatalk
 
You must log in or register to reply here.
Back
Top