Question on how I should work the purchase of Griots 6" Polisher

1

1511

New member
Joined
Apr 3, 2012
Messages
46
Reaction score
0
I know this all comes down to opinion and other peoples experience. I've been reading posts for the last 2 weeks and my head is just spinning with information. At first I was dead set on the Porter Cable 7424XP. After reading through this forum I have decided that it would be a far better purchase to go Griots. Now with that being said, I am in a dilema.

First off there are quite a few packages that involve Griots 6" ROP. I have kinda set myself on wanting 5.5 inch pads but maybe someone can shed some light. I have two vehicles that I would be working on off the bat. The first is my wifes 2011 Jeep Grand Cherokee in Metallic Black. This needs some paint correction. Some swirls, some light scratches and some contaminated paint. The second is my 2012 Charger is Silver. I know that with silver I can't expect the most but I have kept on this car as I bought it brand new. The Grand Cherokee was bought used and needs some TLC.

Now onto whats in my wax cabinet so far. I have quite the array of waxes and recently added some more from Chemical Guys. I'd like to list what I have so that someone can help answer what I need to add to get the results I am looking for. I have Chemical Guys Blacklight, Jestseal, 50/50 and their 3x sealant with carnuba. I also have some Duragloss 101 and a meguiars and mothers clay kit. Also I have a good amount of store bought waxes.

My question is, I have a budget of less than $250 shipped. I'm looking to get the griots, some pads and a polish/paint correction to assist in my problems with the Grand Cherokee. I also woudl like to pick up a couple of grit guards for washing (14.99) and some V7 as I read some awesome stuff on that (18.99). So with that being said I have around $216 to play with. Anyone have any ideas?

To note, I am a newb to the DA world. For the last 10+ years I have always hand applied wax. I am also new to non store bought wax being that I recently placed my first order for some chemical guys wax.
 
Get the Griots polisher and the Meguiars Microfiber DA Paint Correction System (5 inch kit). It will put you a tiny little bit above your budget ($230 total for polisher and kit). You can get free shipping over $95 for being a forum member with code AGO.

This system is perfect for anyone new to machine polishing. I did my car for the first time last fall. This was the first time I ever picked up a polisher. The results were fantastic to say the least and it was very easy.
 
1511 said:
To note, I am a newb to the DA world. For the last 10+ years I have always hand applied wax.
Click to expand...

Once you remove swirls by machine and see how GREAT --> you <-- can make the paint look you'll be hooked...

I can't count how many times there's been a post like yours in the last 10 years where the person came back and said something like,

I should have moved up to machine polishing sooner!




tommythecat said:
Get the Griots polisher and the Meguiars Microfiber DA Paint Correction System (5 inch kit).

This system is perfect for anyone new to machine polishing. I did my car for the first time last fall. This was the first time I ever picked up a polisher. The results were fantastic to say the least and it was very easy.
Click to expand...


The Meguiar's Microfiber DA Correction System is a very good system and just about anyone can get professional results the first time and every time as long as they're working on factory paint, which is what the system is designed for.


If you get the Meguiar's Microfiber DA Correction System, down the road add a few foam pads to your arsenal as foam still finishes out nicer in most instances than fiber pads of any type.

My friends and former co-workers, Jason Rose and Mike Pennington flew out to Autogeek from Southern California and we made this how-to video together that shows you everything you need to know about using the Meguiar's Microfiber DA Correction System.

[video=youtube_share;WhJYFLgIjhE&hd=1"]Autogeek.net - New Meguiars Microfiber DA System - YouTube[/video]




:)
 
The Griot's wheel also has a lifetime warranty and with their customer service, IF you ever have a problem with the machine, getting a new one will be NO problem. Once you get comfortable with the 6" wheel I'm sure you'll end up with the Griot's 3" RO also, it makes bumpers, door pillars, door surrounds and headlights especially a breeze!
 
Agree with all the above. MEgs MF system is a real gem to work with and get good results with. Eventually will probably want some foam pads and some other polishes.

Spend the time and money on the paint correction steps. Properly corrected paint is what will make the cars look their best. Waxes are only a small percentage of the final look. Smooth paint will make the biggest difference.

The final step of the Megs MF system contains a decent wax.
 
Very intersting. Now with the Meg's MF system can you apply other waxes/polishes/sealents with it? Thanks for all the replies.

Also what are your thoughts on the Griots own kit that they have. I believe one is with wax and one is with sealant. They cost $199 and come with a few pads.
 
Another question is should I go with 6.5 inch pads or 5.5 inch pads? I'm assuming that the Griots comes with a 6inch backing plate so if I wanted to go 5.5 I would need a new backing plate?
 
1511 said:
Very intersting. Now with the Meg's MF system can you apply other waxes/polishes/sealents with it? Thanks for all the replies.
Click to expand...

Yes you can, results will vary, start a new, dedicated thread with this topic if you want specific recommendations.



1511 said:
Another question is should I go with 6.5 inch pads or 5.5 inch pads? I'm assuming that the Griots comes with a 6inch backing plate so if I wanted to go 5.5 I would need a new backing plate?
Click to expand...


I just wrote an article about this last Friday...

5 inch Backing Plates on Meguiar's, Griot's and Porter Cable DA Polishers


Griot's pads are thin and work well with their machine. Industry standard 6.5" pads are 1 1/4" thick and they do work but 5.5" thin pads are always going to rotate under pressure better, especially as they tend to get wet with product.

I have tons of articles on the topic of polishing paint with DA Polishers, check them out in my article list.



:)
 
Thanks for the info all. I will rea through those articles Mike. I appreciate all the help and I'm sure this is one that many people have asked this question and there are many people who will still. Thanks for taking the time to answer my questions and thanks to all that replied.
 
1511 said:
Thanks for the info all. I will read through those articles Mike. I appreciate all the help and I'm sure this is one that many people have asked this question and there are many people who will still.

Thanks for taking the time to answer my questions and thanks to all that replied.
Click to expand...

No problemo...

As a person that belongs to multiple forums I appreciate it when I join a forum, ask questions and get real help, not lame one-liners or have someone tell me to use the [search] button.


AGO is made up of stellar people always willing to help others...



:xyxthumbs:
 
Well I placed the order and the Griots will be here on Friday. Thanks for all the info and hopefully I can get some pics of my projects.
 
You must log in or register to reply here.
Back
Top