Question using McKees all in one.

[danh52]

I am using McKee’s RV All-In-One Cleaner Wax & Sealant on oxidized white gelcoat and my question is how do I tell when the polish is done and should be wiped off? I'm using a Flex 3401 with 5.5" orange pad, first time using the flex, and the all-in-one is doing a good job. I am happy with the results but just not sure when to stop buffing and wipe off the residue.

 

[57BORNTORUN]

Rule of thumb is usually 6-8 section passes in a 2x2 foot square.

 

[FUNX650]

I am using McKee’s RV All-In-One Cleaner
Wax & Sealant ...my question is

how do I tell when the polish is done
and should be wiped off?

...the all-in-one is doing a good job.
...just not sure when to stop buffing
and wipe off the residue.

It's not so much when the polish is done.
Rather, it's: Do Not "Dry Buff"!!

Accordingly:
"As you're making a single pass with the
polisher, the paint behind the path-of-travel
should have a visible wet film on it". ~Mike Phillips

Source:
http://www.autogeekonline.net/forum/tricks-tips-techniques/36237-wet-buffing-technique.html


Bob