Quick question

6LS2

6LS2

New member
Joined
Nov 6, 2006
Messages
451
Reaction score
0
Hi there, just a question for you detailers. When polishing a car with the PC, how do you do areas like this?

42n8gfp.jpg


Like under the spoiler, the area with the number plate is, etc.

Thanks.

6LS2
 
get as close as you can and then by hand or maybe use a edge pad but you can burn the paint if you run it along the edge
 
Most PC pads have a rounded edge that allows you to get into these areas. You have to be careful though. The EDGE2000 system is really good at this. It takes time and a delicate hand to learn this though.


You can always come back with and do it by hand it uneasy with the use of a machine.

The only way to get under your spoiler is by hand.
 
Thanks guys, I was trying to figure out how I could do the underneath of the spoiler when I did a test spot on the trunk earlier. I took pics if anyones interested

30ktytw.jpg
 
I don't know how it is on your car, but to get under the spoiler on my car (if it was still on) would be to take it off. Ours is 4 easy to get to bolts and it comes right off. Then you can just go right over it with the PC.
 
You must log in or register to reply here.
Back
Top