removal with microfiber bonnetts

M

MONSTERMATT

New member
Joined
Oct 16, 2006
Messages
59
Reaction score
0
what speed should i be set on to remove the poor boys swirl removal #1 and the poor boys EX sealant? i got the wool levelng pad and the micro- fiber bonnetts but i need to know what speed to use on the pc to remove as opposed to apply? also in your opinion , do you think the poor boys EX will work to protect this winter?
 
It probably will protect.... you can always do 2x EX and then top with a carnuba 2x.

That was my plan originally, but decided last minute to use the new DP Sealant 2x and then top with a nuba.....

Sorry, cant help you with removal... I always remove by hand (sealants and waxes)
 
I would remove the swirl remover as you go by hand, you can remove the sealant on 5 with a clean MF bonnet..;)

I think the EX would do better if you topped it with Collinite or another durable wax. It depends on how bad your winters are too...
 
Last edited:
I would reccomend the same as the other guyz, remove by hand, you can use some Qd along with the Mf to help remove without any smudges.
 
wool is extremely abrasive, it is a true cutting product. I highly suggest using several abrasive pads first. SSR 1.0 is a finishing polish so not very abrasive in itself.

You can use the wool pad covered with the bonnets for wax or sealant removal. No need for speed ... around 3 max. Just as easy via hand.
 
I'm certainly not an authority here, but from everything I hear and read hand removal seems to be the best.

G'Luck
 
You must log in or register to reply here.
Back
Top