Rupes cutting

J

Jimmymack22

New member
Joined
Aug 14, 2014
Messages
32
Reaction score
0
I have seen several post about "Rupes cutting great if you know how to use it" and "great machine once you know how to use it"
Well how do you use it? I have used PC and I didn't do anythin special just tried to make sure pad kept spinning, I just recieved my Rupes 21 so what do I need to do different? How do I get the most out of this machine?
 
Do the brickmod, how well was you corecting with the pc?

Alot of the corection has to do with the armspeed. There are alot of great threads on the forum About using the rupes. Feel free to ask more :-)
 
My correcting was not very good with PC but I was getting better, I got some microfiber pads and that made a big difference in my speed.
Brickmod? I saw alot of rupes threads but not on how to use?
 
Stampe said:
Do the brickmod, how well was you corecting with the pc?

Alot of the corection has to do with the armspeed. There are alot of great threads on the forum About using the rupes. Feel free to ask more :-)
Click to expand...

You guys dunno about the Brick Mod.... I can't give up all my secrets.
 
Stampe said:
Do the brickmod
Click to expand...
Rupes polerrondeller
22 aug 2014 09:15pm

Min 15 maskin är påväg
Ska bli trevligt att testa den
Kör ni som har den med rupes egna trissor
Mf trissor kör ni dem direkt på plattan som satt eller köpte ni fästplattan som är till för mf padd

Brickmod?

Hoppas jag blir nöjd med denna maskinen

"Bob Blomgren"
 
So, is this "brickmod" a sarcastic way to get the op to search? I'm not familiar with this so called brickmod... Is it then name for the Kevin brown washer mod?
 
I have done several searches and found many post that talk about the rupes machines, and they talk about learning the correct way to use the machine, they just dont say what that correct way is/are.
 
On YouTube look up Rupesspa that's their channel. They have videos on how to use the machine properly
 
No one has had a pad do this or has any ideas what would cause this?
 
Pad and product choice, as well as technique are going to be major factors in getting excellent and fast correction with the Rupes (LHR21).

This is M205 (Finishing polish) with a Megs MF cutting pad on hard BMW paint. Kevin Brown is the man when it come to all things Rupes! :dblthumb2:





 
Use slow armspeed as well,
Before
yry9ujuq.jpg


And after 2 slow passes on a benz 2010 i think?

a7u2u2ed.jpg


Scholl s3 and flexipad mf cutting disc.
 
You must log in or register to reply here.
Back
Top