Rupes UHS topped with Wolfgang Fuzion

L

lj993

New member
Joined
Mar 15, 2014
Messages
239
Reaction score
0
I have two liters of Rupes UHS and several UHS pads. It has been a while since I used them because I have been using the HD speed for my go to aio. I decided to pull out the UHS and see if I was missing anything. The Rupes 21 is amazingly smooth, quiet and super efficient. I was working on a Mercedes e550 convertible. I was a bit strapped for time so I focused on the hood and front fenders. I did a quick wipe down followed by a clay bar treatment. I used Sonax clay lube for the first time. I usually use chemical guys clay luber, which I really like. The Sonax smelled good and worked well, very slippery. The car was actually in pretty good nick. I followed up with the UHS. the Mercedes paint was brilliant. It was as smooth as glass. It looked like you could reach in 3 feet. I topped the UHS with Two coats of Wolfgang Fuzion. What a beautiful combo. The Uhs is not as slick as the hd speed. The hd speed it slick as wet ice when finished, the Rupes was super flat and smooth, but definitely not very slick. Once the fuzion was supplied, it was smooth, slick and deep as could be. The Mercedes paint is incredible. It is really so beautiful. The Rupes Uhs treatment, followed up by the fuzion was a great combo. It really looked great. I highly recommend all of the products that I used. Thanks. Phil.

Sonax clay lube
Rupes Uhs pads and Uhs aio
Rupes 21
Wolfgang Fuzion
 
You missing a lots of thing not using UHS, HD speed is fake correction and it does fill swril not correcting it, while UHS is a true 1 step correction compound. You can try using Speed and UHS on some severe paint damange and then wipe out with Eraser or strong IPA, and you will find the fact. Me and my detailer friends use to have lots of customers furious back to our shop within a month when all those defect coming back again after a few wash, and once we use UHS it is zero case complain.

As a result From something that fill-in (I dont say it's a filler but it's something in Speed) and it wax, it's sure that speed will feels smooth at finishing compare to UHS that leave no protection behind. But once you apply some quality after UHS polishing, then it's game over, you will have no follow up return complain.
 
You can check update compound chart from Autopia, it's test and proved already that speed have only 2 out of 10 cutting ability which is equal to Menzerna 3800, while UHS have cutting ability of 8 out of 10. If you impress with using UHS pad, you can try using UHS with URO fiber, you will get even greater cut and deeper finishing.
 
Thanks for the replies. As you point out, there a many other products for serious paint correction. I use the aio type products when I need a quick pop or when the vehicle just doesn't need lots of cut for correction. The Mercedes shown was in pretty good shape and just didn't need much correction. For quick and easy and pizazz, the hd speed or the Rupes Uhs are just tough to beat. That and polishing is a great form of stress release for me. If I used anything more aggressive I wouldn't have any paint left on my cars�� Phil
 
Does the griots garage finishing sealant act more like the us Speed or the Uhs? I haven't used the griots garage yet. I have seen great reports. Thx. Phil
 
Valky said:
You missing a lots of thing not using UHS, HD speed is fake correction and it does fill swril not correcting it, while UHS is a true 1 step correction compound.
Click to expand...


I respectfully disagree.

First - UHS is an aggressive compound/polish. It cuts well and finishes out like a polish BUT it's not a ONE-STEP in the sense that it leaves protection behind as it doesn't.


3D HD Speed is a medium cutting one-step cleaner/wax. It contains what I consider top shelf abrasive technology and it does in fact REMOVE PAINT and this means it does in fact offer REAL CORRECTION. I have showcased this one-step cleaner/wax in my last two Competition Ready Detailing Classes and each student is blown away by the results. For my big 3-day classes I always bring in horrible condition daily drivers to teach what I call Production Detailing. This is done on Saturday after we go over Show Car Detailing which starts on the first day --> Friday.

The point being, I don't bring in kind of bad cars to teach production detailing I bring in hacked-up cars to teach production detailing and the reason why is to show just exactly what can be done by a quality one-step cleaner/wax.


So I respectfully disagree as I've used 3D HD Speed multiple times on horrific cars and I know what I see are amazing results - not just filling.


And for the thread starter, the 3D HD Speed could be used AFTER the UHS step which would work like a polishing step only leaving the finish protected. The less aggressive abrasives in the Speed could and would refine the results created my the more aggressive UHS and again the benefit is Speed contains protection ingredients while UHS does not so after wiping off the Speed the paint would be protected and beautiful.

You could then use the Wolfgang Fusion as a topper.


:)
 
lj993 said:
Does the griots garage finishing sealant act more like the us Speed or the Uhs?
Click to expand...


Yes.

The Griot's Finishing Sealant won't offer as much cut or correction ability as Speed but they are both what you would categorize as cleaner/waxes or cleaner/sealants depeinding upon what the base of the protection ingredients are.

A cleaner/wax or what some like to refer to as AIOs will

  1. Clean/Correct
  2. Polish
  3. Protect


And do all of the above three processes in one step.

Most waxes found at retail stores, like Nu Finish are in fact one-step cleaner/waxes they just don't say

Cleaner Wax

On the front label. I have an article on this topic.


Here's the link to the Griot's Finishing Sealant for more info


Griots Garage BOSS Finishing Sealant


:)
 
Thank you Mike. My family, friends and neighbors just don't understand me. Obsession with cleanliness. I am sure that most everyone in this forum have had similar experiences. �� I love this site. I think that I will go wash my car now. Phil
 
Mike, thank you very much for post #6 and making those clarifications.
 
Valky said:
You missing a lots of thing not using UHS, HD speed is fake correction and it does fill swril not correcting it, while UHS is a true 1 step correction compound. You can try using Speed and UHS on some severe paint damange and then wipe out with Eraser or strong IPA, and you will find the fact. Me and my detailer friends use to have lots of customers furious back to our shop within a month when all those defect coming back again after a few wash, and once we use UHS it is zero case complain.

As a result From something that fill-in (I dont say it's a filler but it's something in Speed) and it wax, it's sure that speed will feels smooth at finishing compare to UHS that leave no protection behind. But once you apply some quality after UHS polishing, then it's game over, you will have no follow up return complain.
Click to expand...

Clearly Mike is a genuinely nice guy and is always VERY respectful to everyone and willing to take the time to write you an in-depth informative response.
Personally, I would have been more blunt and encouraged you to educated yourself on the difference between a 1-step polishing compound and a cleaner wax (popularly known as an AIO). Then I would've tried to argue that pinnacle souveran paste wax is "fake protection" because it doesn't last as long as opti-coat pro.
See what I did there?
 
How long does the protection last with HD speed? On a maintained and washed regularly vehicle.
 
If you just wash with products like D114 or Mckee's N-914 and don't use spray wax/spray sealants/detail spray I would say 4-6 weeks.
 
idriveblackcars said:
How long does the protection last with HD speed? On a maintained and washed regularly vehicle.
Click to expand...

Longevity is so subjective, it really depends on so many variables, paint color, garaged or not, environment etc. But that pretty much sums up longevity of any product.
 
You must log in or register to reply here.
Back
Top