I'm going to be buying a new truck soon and wonder if it's worth it to upgrade to a paint coating. It will be Ford's magnetic metallic gray paint. I currently already have the Griot's sealant, wax, rinseless wash, and spray detailer. I've been thinking about going to McKee's 37 but will have to purchase the paint prep, coating, N914, and the spray detailer. Am I going to notice that much of a difference if I make the investment to jump to the McKee's line? Thanks in advance.
Should I make the jump to a paint coating?
- Thread starter rcg703
- Start date
Desertnate
Well-known member
- Aug 5, 2013
- 6,239
- 292
It all depends on what you hope to gain.
I didn't notice much difference in appearance. To my eyes, McKee's 37 coating looks a lot like Collinite 845. It's a very glossy, wet look.
The biggest difference I've experienced was in the maintenance of the vehicles. I've found the vehicles stay cleaner longer since a hard rain will often knock off the dust that would stick to some waxes and sealants. Washing/cleaning is much easier as well as dirt easily comes off with a gentle pass of the wash mitt and bug splatters/bird droppings also come off much easier and don't stick nearly as bad. Finally, I've found that rather than waxing/sealing the car every six months, I'll only have to do it every 12~18 months. Right now, it is holding up well enough I'm planning on the 18 month cycle.
I didn't notice much difference in appearance. To my eyes, McKee's 37 coating looks a lot like Collinite 845. It's a very glossy, wet look.
The biggest difference I've experienced was in the maintenance of the vehicles. I've found the vehicles stay cleaner longer since a hard rain will often knock off the dust that would stick to some waxes and sealants. Washing/cleaning is much easier as well as dirt easily comes off with a gentle pass of the wash mitt and bug splatters/bird droppings also come off much easier and don't stick nearly as bad. Finally, I've found that rather than waxing/sealing the car every six months, I'll only have to do it every 12~18 months. Right now, it is holding up well enough I'm planning on the 18 month cycle.
Desertnate
Well-known member
- Aug 5, 2013
- 6,239
- 292
That's the hard part and I fully understand. I've got a 1/3 bottle of Collinite 845, some Klasse bottles, an AIO or two, and a glaze laying around that only get used for odd family jobs or on wheels. I'd donate them if I could find someone willing to take them. Sadly, around here everyone views car detailing as running their vehicle through a coin operated tunnel wash at the gas station...even the high end vehicles....
vobro
Active member
- Jun 25, 2012
- 1,162
- 0
Most local fire departments will take your old stock! I was in the same spot as the op when I first got into coatings but since I made the move I don't regret it, at the time I had 4 family vehicles that included a Ram. The time savings that I seen after the coatings i.e. maintanence is enough for me to recommend the move to coatings. I still do a weekly wash on all cars but it's easier to maintain, if you're one that washes every 2 months or hits the car wash than no the coating won't have benefits over a sealant.
BudgetPlan1
Well-known member
- Dec 21, 2015
- 2,143
- 211
I believe you can use N914 as a panel wipe at the correct dilution, (As Paint Prep Dilute 1:8), eliminating the need for the paint prep product (so long as you have polished/corrected before coating). After correcting/polishing I have always just wiped down with a paint prep/panel wipe before applying McKees Paint Coating.
For the cost, McKees is a nice choice
For the cost, McKees is a nice choice
- Thread starter
- #7
Yep, I noticed that when looking at the products earlier. Even though it will be a new truck, I'm still going to polish it and get it as close to perfect as I can before applying the coating. You guys are selling me on McKee's 37! I'll just wait for a sale or promo code and put in my order.
goldendodo19
New member
- Jul 1, 2013
- 638
- 0
Whichever route you decide to go magnetic gray has A LOT of metallic in it and will look amazing once its fully polished up and freshly waxed/sealed/coated. I enjoy using a nice wax in the summer months and a sealant right before winter hits, just my personal preference.
I applied Optimum Opti-Coat two years ago to the front half of my car. To this day, it is still shiny, looks great from a few feet away. However, the moment after I applied the coating, it got bird-bombed, swirled, tarred, sapped and hit with embedded particles just like any clear-coat would. The front half of my car is rough to the touch and has modest swirling, but is shiny. The back half of my car is smooth to the touch and 90% swirl free. This is because I can clay and polish the back half of my car. I'm afraid to do this with the coated front half of my car - don't want to wreck the coating. So it depends on you. If you are a perfectionist and like to fuss with your car, don't do a coating. If you want the car to be shiny, and don't care if the finish is not so awesome on close inspection, do a coating. Kind of comes down to that.
The Guz
Well-known member
- Jun 17, 2013
- 8,786
- 65
Gloss Coat can be coated using optimum car wax as clay lube.
Klasse Act
Well-known member
- Feb 21, 2012
- 27,705
- 2,735
Others have already said it but it can't be said enough, stays cleaner longer due to NOT attracting dust like products with wax in it. Speaking of wax, forget about using RW or WW's that have wax in it because it WILL change the look THAT you've achieved with a coating. Right now it's N914 and Ech2o for me to maintain my coatings finish, hasn't changed the look one bit.
The looks of a coating are very impressive and there's no products to boost its longevity/appearance when you feel you need to a couple monthes or year down the road, depending upon which product you use to coat with.
Finally cleanup is easier and that's a big plus with a big truck!
Sent from my LGLS990 using Tapatalk
The looks of a coating are very impressive and there's no products to boost its longevity/appearance when you feel you need to a couple monthes or year down the road, depending upon which product you use to coat with.
Finally cleanup is easier and that's a big plus with a big truck!
Sent from my LGLS990 using Tapatalk
Desertnate
Well-known member
- Aug 5, 2013
- 6,239
- 292
I don't think any coating will provide much more in the way of scratch/mar resistance. The real selling strength is exactly like Klasse Act just mentioned: it makes washing and maintenance much easier. When washing and drying become nearly effortless, there is far less potential for maring. Also in my case, the coatings last far longer than even the most durable sealant I've used, so I have an easy to clean vehicle that looks great and I don't have to detail it nearly as often as in the past when I used less durable products.
Desertnate
Well-known member
- Aug 5, 2013
- 6,239
- 292
I have noticed a big difference in dusting, even when we aren't in the middle of a spring pollen "blizzard". I live in a fairly dusty area due to all the agricultural fields. Vehicles accumulate light dust constantly almost year round. Only a covering or snow or long periods of rain will knock it down. I've noticed significantly less dust accumulation on my vehicles since I've applied a coating. Not only is the accumulation much less, but due to the better water sheeting properties, a good rain shower will rinse away what little dust has accumulated.
Long ago I moved from carnuaba waxes to sealants in order to make my life easier. Now I've used a coating, it is the next progression for me. I love detailing my cars too, but life doesn't afford me much time lately. This way I still wash them on my normal intervals, but don't have to do a full LSP refresh nearly as often.
DrBeasleys
New member
- Mar 27, 2017
- 65
- 0
Coatings and sealants are more durable than wax, so having one on your paint is great way to ensure its protected. You can also layer a wax on top of many coatings which is great for those of us who enjoy waxing our cars. If you do apply a coating, make sure you go through all the prep steps noted by the coating manufacturer. Nothing worse than sealing in imperfections in your paint.