So confused ... Please help with the order I should use products

NickNickNick

NickNickNick

New member
Joined
Nov 19, 2014
Messages
25
Reaction score
0
Thank you in advance for the help.
So it was another winter of collecting info and putting products on my wish list. Well here I am ready to pull the trigger on an order but I'm not sure which products will work with one another, which I am going overboard with and which I am wasting my time with.

So my plan was to do a full detail in the coming days, provided the NE weather cooperates, on my 2015 Black Forester XT and a brand new (2 months) 2017 Polar White MB GLE350 (non-ceramic).
I was going to use my DG shampoo (901), nanoskin mitt then do a full pass with the Rupes 15 and the UHS system (polish and pads). The Subbie needs swirls removed (see my DISO posts that will forever haunt me) and the MB just needs a solid foundation going forward.

<Insert an IPA step here>

I am going to follow that with Ammo Reflex then Ammo Skin. I may do a final pass with Collinite 845 or 915 paste - this all depends on my energy levels :)

But then I recall Rupes 808 Sealant being on my bucket list - does this have a place in my routine? If so, where?
Then I also remembered how impressed I was with the Hydr02 Lite product as well ... Is this needed?

Any other suggestions? Does the order sound ok?

Thanks again,
Nick
 
Should be ok with the UHS on both cars, expect the Subaru to be "easier" to correct and the Merc to be harder. The UHS should take care of both. Shouldn't need anything other than Reflex if that is your coating of choice. No other sealants or waxes are appropriate over the coating as they will mask the properties of the coating and may not adhere properly at all.
 
ekennett said:
Should be ok with the UHS on both cars, expect the Subaru to be "easier" to correct and the Merc to be harder. The UHS should take care of both. Shouldn't need anything other than Reflex if that is your coating of choice. No other sealants or waxes are appropriate over the coating as they will mask the properties of the coating and may not adhere properly at all.
Click to expand...

I agree. Although Larry says skin is ok to apply over reflex and recommends it.

You could mix P808 to be used as a drying aid. It's on the bottle on how to do that.
 
The Guz said:
I agree. Although Larry says skin is ok to apply over reflex and recommends it.

You could mix P808 to be used as a drying aid. It's on the bottle on how to do that.
Click to expand...

Good idea - i'll add that to the list.
Does Hydro2 Lite have a place or am I overcomplicating?
 
You must log in or register to reply here.
Back
Top