sonax polymer net shield

Yes very nice product. I've been playing with it on our personal cars. Have not used it on customers cars yet. Follow the directions very easy to use.
 
Lasted a good 5 months on my cars through one of the roughest winters ever here and beads INSANELY!!
 
EVOlved said:
Lasted a good 5 months on my cars through one of the roughest winters ever here and beads INSANELY!!
Click to expand...

Yep! Great stuff and very easy to apply / remove! I've had it on my truck since last fall and it stills beads nicely after all the snow, salt, and sand.
 
I'm glad to hear all the positive feedback. I've been debating whether or not to buy it for a while, and think I'll pull the trigger soon.
 
Can anyone confirm or deny this any further?
 
casvg5 said:
Can anyone confirm or deny this any further?
Click to expand...

If you're looking for a sealant... buy it.

It looks great, it is easy to use (when directions are followed), and the beading is like nothing you've ever seen before... unless you've used Sonax Brilliant Shine Detailer :)
 
Detailers Domain loves it and I`ve read other great reviews. On my list once I am low on my current stock of LSP`s.
 
The directions on the can are a little vague. Do you apply it thin and let it cure then polish it off? Or is it best sprayed on and buffed off immediately? It doesn't specify.
 
casvg5 said:
The directions on the can are a little vague. Do you apply it thin and let it cure then polish it off? Or is it best sprayed on and buffed off immediately? It doesn't specify.
Click to expand...

We used it on a rotary buffer only Corvette in the write-up below...

1987 Corvette Show Car Makeover - SONAX Showcase



Here's an excerpt....

Here's the results BEFORE we applied the SONAX Polymer Net Shield...

1987_Corvette_Show_Car_Makeover_0311.jpg


1987_Corvette_Show_Car_Makeover_0321.jpg




De-tape and Seal with SONAX Polymer Net Shield
After we removed all the masking tape and cover-up towels and wheel maskers we re-wiped any residues off the paint and then applied the SONAX Polymer Net Shield
1987_Corvette_Show_Car_Makeover_0331.jpg



1987_Corvette_Show_Car_Makeover_0341.jpg



Apply by hand
Directions on the label say to apply by hand to a small section, work in and the remove before moving onto the next section.
1987_Corvette_Show_Car_Makeover_0351.jpg



Careful wiping
While some of the guys were applying the Polymer Net Shield, others were carefully wiping off the excess using the very soft, rolled edge green microfiber towels.
1987_Corvette_Show_Car_Makeover_0361.jpg



Here's Jeff carefully wiping off the SONAX Polymer Net Shield using perfect technique...
1987_Corvette_Show_Car_Makeover_0371.jpg


1987_Corvette_Show_Car_Makeover_0381.jpg





And here's the beauty shots...

1987_Corvette_Show_Car_Makeover_0391.jpg


1987_Corvette_Show_Car_Makeover_0401.jpg



Here's the products behind the wet-paint look...
1987_Corvette_Show_Car_Makeover_0521.jpg


:xyxthumbs:
 
casvg5 said:
The directions on the can are a little vague. Do you apply it thin and let it cure then polish it off? Or is it best sprayed on and buffed off immediately? It doesn't specify.
Click to expand...


Spray on applicator, spread on 2x2 area, then immediately wipe off.

If you spread over a large area it may be difficult to remove and cause streaking. It is very easy to wipe off if you apply to a small area at a time.

DD has a good YouTube video demonstrating application.
 
zmcgovern45 said:
Spray on applicator, spread on 2x2 area, then immediately wipe off.

If you spread over a large area it may be difficult to remove and cause streaking. It is very easy to wipe off if you apply to a small area at a time.

DD has a good YouTube video demonstrating application.
Click to expand...

Thank you! Ive not tried it yet but ive heard it beads like CRAZY.
 
If I remember correctly, it wiped off a tick on the hard side and that's probably one of the reasons they recommend applying to a single panel and then wiping that panel off before moving onto a new panel.

One thing I do and try to share with others and that's anytime you're using a wax, sealant or coating that's NEW to you. Apply following all directions to just a small area, about the size of a microfiber towel.

Then again, following directions as to how to wipe it off and how long to wait, go ahead and remove the product from the paint.

Real quickly this will introduce you to how this product applies and wipes off before you go over the entire car.

I wrote an article about this specifically to share for people using Klasse Sealant Glaze to keep them out of trouble but the technique works for any LSP.


A tip for working with waxes, paint sealants or coatings that are new to you




:)
 
Beads like crazy, but I'm not too thrill about the look. And so I gave the bottle away to my brother, and kept the Brilliant Shine Detailer since it's similar in performance, only a lot easier to apply.
 
BrutalNoodle said:
Beads like crazy, but I'm not too thrill about the look. And so I gave the bottle away to my brother, and kept the Brilliant Shine Detailer since it's similar in performance, only a lot easier to apply.
Click to expand...


What's wrong with how it looks? I couldn't tell a difference in direct sunlight when it was applied on a few panels and comparing it side by side.
 
I think netshield is a truely great product! And I'm also very pleased with the level of gloss it leaves behind. (Gloss level increases as the Netshield cures) Not the slickest finish but the lasting protection more than makes up for it!



 
You must log in or register to reply here.
Back
Top