Souverans Paste Wax Application

B

BlackCoupe

New member
Joined
Apr 23, 2006
Messages
525
Reaction score
0
Can someone point me to a thread where the application of Souverans Paste Wax is described in detail? I understand it is to be removed before it dries, which seems weird. Can you apply it with the DA on 3? I guess if it is going to come off before it dries, you would not be able to take it off with the DA? Do you buff it ant ANY point? How about after it has had a chance to "cure".
 
I wouldn't suggest using a machine to apply a paste wax. It won't improve the look at all doing it that way. The easiest way of applying a paste wax is by hand. Just wipe it on in straight lines in the direction wind moves over the car when possible. Then just buff it off with a microfiber towel when you are done. It doesn't dry hard as a rock or anything. You can wait a few minutes or a few hours and it will buff off with the same amount of ease. And waxes don't 'cure'. They just coat the car and sit there. They aren't like sealants that need to 'cure' before applying additional layers.
 
I use a foam applicater, front to back motion, then use a microfiber towel to
remove while wax is still wet. Also use a very thin coat. After that stand back
and enjoy the best shine you will ever see on your vehicle.
 
BlackCoupe: I've used the DA to apply Souveran paste. I remove the wax from the jar and place it on the inside of the lid for a base. Then, I wipe the polishing pad over the wax and apply to the car on a 3 speed setting. I like this method for a uniform coverage.

Typically, I do a panel at a time and buff with a mf towel.

Easy to do and I think you'll like the results.

Totoland Mach
 
"quote: They just coat the car and sit there. They aren't like sealants that need to 'cure' before applying additional layers

how much time between coats of sealers as u.p.p.???
 
My bottle of UPP says "additional layers can be applied after 24 hours."
 
OCDetails said:
I wouldn't suggest using a machine to apply a paste wax. It won't improve the look at all doing it that way. The easiest way of applying a paste wax is by hand. Just wipe it on in straight lines in the direction wind moves over the car when possible. Then just buff it off with a microfiber towel when you are done. It doesn't dry hard as a rock or anything. You can wait a few minutes or a few hours and it will buff off with the same amount of ease. And waxes don't 'cure'. They just coat the car and sit there. They aren't like sealants that need to 'cure' before applying additional layers.
Click to expand...

So you are saying:

1. You don't get a more uniform application of paste wax with a machine.

2. Applying paste by hand is easier than with a machine.

3. A wax doesn't harden.

4. You can wait several hours before removing Souverans, notwithstanding what the instructions say.
 
Last edited:
Souveran paste was designed to be removed almost immediately after application, dont challenge it, just do it. You will be amazed at how easy it comes off and how well it looks. Following manufacturers directions is the best advice. Take a foamy and swirl around the top of the Souveran 2-3 times. Wipe on the car in straight motion. Finish the entire panel, and go back and remove with a nice thick micro. Bliss !

Using any polisher with most waxes and sealants is just a waste of material. It will look no better and last no longer. It will however require much more product for the same outcome.
 
It was my understanding that carnaubas do need a "cure time". When I was recently in the Driver's Seat drooling over a container of Souveran, the guy in the store told me that you have to wait 24 hours between coats for it to cure. And also Steve from Poorboy's says that you have to wait one to two hours (preferrable two) between coats of Natty's. If there is a consensus out there about cure times and carnaubas I sure would be interested in knowing.


OCDetails said:
I wouldn't suggest using a machine to apply a paste wax. It won't improve the look at all doing it that way. The easiest way of applying a paste wax is by hand. Just wipe it on in straight lines in the direction wind moves over the car when possible. Then just buff it off with a microfiber towel when you are done. It doesn't dry hard as a rock or anything. You can wait a few minutes or a few hours and it will buff off with the same amount of ease. And waxes don't 'cure'. They just coat the car and sit there. They aren't like sealants that need to 'cure' before applying additional layers.
Click to expand...
 
FloridaNative said:
It was my understanding that carnaubas do need a "cure time". When I was recently in the Driver's Seat drooling over a container of Souveran, the guy in the store told me that you have to wait 24 hours between coats for it to cure. And also Steve from Poorboy's says that you have to wait one to two hours (preferrable two) between coats of Natty's. If there is a consensus out there about cure times and carnaubas I sure would be interested in knowing.
Click to expand...

The problem with carnuabas doesnt seem to be curing time specifically, it is the point of diminishing rewards. Its clear with some sealants that additional layers work well in adding gloss and reflectivity. But with carnuabas there seems to be no "real" measurable gain in adding more than one layer. Doesnt mean you cannot, and doesnt mean it wont provide for more uniform coverage (maybe you missed a spot), but quantifiably it doesnt seem that carnuabas need to be layered. There gloss, depth, and warmth are almost immediately apparent.
 
FloridaNative said:
It was my understanding that carnaubas do need a "cure time". When I was recently in the Driver's Seat drooling over a container of Souveran, the guy in the store told me that you have to wait 24 hours between coats for it to cure. And also Steve from Poorboy's says that you have to wait one to two hours (preferrable two) between coats of Natty's. If there is a consensus out there about cure times and carnaubas I sure would be interested in knowing.
Click to expand...

I PM'd you.
 
killrwheels@autogeek said:
The problem with carnuabas doesnt seem to be curing time specifically, it is the point of diminishing rewards. Its clear with some sealants that additional layers work well in adding gloss and reflectivity. But with carnuabas there seems to be no "real" measurable gain in adding more than one layer. Doesnt mean you cannot, and doesnt mean it wont provide for more uniform coverage (maybe you missed a spot), but quantifiably it doesnt seem that carnuabas need to be layered. There gloss, depth, and warmth are almost immediately apparent.
Click to expand...

Would you ever consider topping Souverans with anything, like Meg's #7 for a short term (day or two) "pop"? Or Meg's 26?
 
BlackCoupe said:
So you are saying:

1. You don't get a more uniform application of paste wax with a machine.

2. Applying paste by hand is easier than with a machine.

3. A wax doesn't harden.

4. You can wait several hours before removing Souverans, notwithstanding what the instructions say.
Click to expand...

1. That is what I'm saying. You would have to take the wax out of the jar to even get it on the pad anyway. It's not going to do better than doing it by hand in this particular instance.

2. Much easier. You'll spend more time trying to get wax on the pad and then putting the wax back in the jar than you would if you just do it by hand. I've tested this and doing it by hand is significantly faster.

3. I didn't say that. I said it won't get so hard that removal would be that difficult. It's just a wax and not cement. If you were to leave it on for a couple hours (there isn't any reason to do that, by the way) then it still wouldn't be that hard to buff off.

4. You can do whatever you want. I wouldn't suggest waiting several hours, but if you did it wouldn't matter. I wax the car and then buff it off after I have dressed the tires. That way any overspray from the tire dressing gets buffed off with the wax. There isn't any reason to wait to buff off a wax. Sealants benefit from a bit of drying time, but not waxes.
 
BlackCoupe said:
Would you ever consider topping Souverans with anything, like Meg's #7 for a short term (day or two) "pop"? Or Meg's 26?
Click to expand...

I'd never top Souveran with anything. In my opinion if you are using Souveran then it should be the top wax. Why top it with something inferior? besides, most liquid waxes and glazes have a certian amount of solvents in them that would likely damage if not remove the Souveran.
 
OCDetails said:
I'd never top Souveran with anything. In my opinion if you are using Souveran then it should be the top wax. Why top it with something inferior? besides, most liquid waxes and glazes have a certian amount of solvents in them that would likely damage if not remove the Souveran.
Click to expand...

Thanks again. I did the roof with Souveran tonight. Just seems weird to put it on and take it off while it is still wet, but it does make the process quicker. By straight lines do you mean a straight line of little circular motion circles, or up and back like sanding a wooden board?
 
up and back is actually the safest way to apply it. It reduces the chances of creating swirls in the paint. Your paint has a sort of 'grain' to it that is created by air and dust blowing over the car as you drive. Waxing in circles will cross the grain and can cause swirls. Even though I know it is safer to wipe products on in straight lines, I always seem to go the small circle route. I'm probably creating swirls, but it is just a hard habit to break. I feel that I can spread the product around better if I go in circles and I don't waste as much. At the price Souveran goes for I can't afford to waste too much of it. lol
 
OCDetails said:
up and back is actually the safest way to apply it. It reduces the chances of creating swirls in the paint. Your paint has a sort of 'grain' to it that is created by air and dust blowing over the car as you drive. Waxing in circles will cross the grain and can cause swirls. Even though I know it is safer to wipe products on in straight lines, I always seem to go the small circle route. I'm probably creating swirls, but it is just a hard habit to break. I feel that I can spread the product around better if I go in circles and I don't waste as much. At the price Souveran goes for I can't afford to waste too much of it. lol
Click to expand...

Got it. Thanks.
 
You must log in or register to reply here.
Back
Top