spot strip washing

C

Camineet

New member
Joined
Jul 11, 2021
Messages
13
Reaction score
0
Hi guys,

Is there a way to just strip wash a small section for correcting and such? I'm new to detailing and paint correction and have been going through an arduous routine of strip washing sections of the car for a day of paint correcting. The washing ends up being like half the car because of how much spillover there is from the suds and rinsing. So, I end up having to do LSP on a lot more than I've even worked on during the correcting.

Is there a rinseless product that would be suitable for just preparing small areas for claying and correcting?
 
I’m sure somebody will have a problem with this but here’s what I do when I need to do a small area:
1.Wipe the area down with a wet Microfiber then dry.
2.Wipe the area again with a 50-50 mix of rubbing alcohol and water.
3.If the panel has been coated with a ton of stuff over the years, use the alcohol again.

If you need to get rid of any type of ceramic coating and such after step number one, polish with something like Maguires 205 or ultimate compound.
 
You can do a rinseless or waterless wash on that section, then use a coating prep cleaner (I like the Otimum one) to remove anything left.

Also, leaving some sections of the car unprotected for a few days is not that detrimental to the paint.
 
First...

Because this is your first post...

Welcome to AutogeekOnline! :welcome:

I actually just approve new pending accounts, saw your account this morning.



Camineet said:
Hi guys,

Is there a way to just strip wash a small section for correcting and such? I'm new to detailing and paint correction and have been going through an arduous routine of strip washing sections of the car for a day of paint correcting. The washing ends up being like half the car because of how much spillover there is from the suds and rinsing. So, I end up having to do LSP on a lot more than I've even worked on during the correcting.

Is there a rinseless product that would be suitable for just preparing small areas for claying and correcting?
Click to expand...


I wouldn't be concerned about "stripping" anything off the paint via a washing/wiping process IF I'm also going to compound or polish the paint.

Any quality compound and/or polish will remove anything on the paint.

Heck, if it were me and I was doing this out in the garage I'd just wipe the area I want to work on with some SONAX glass cleaner and get to work.



:)
 
I agree with what Mike said, don't overthink it. Strip washing is not that important at all if you're going to be polishing/compounding the paint. It's just another step we do, like Iron-X or clay, that may or may be not necessary but it's cheap insurance and a way to guarantee the finish of the detailing but of all the steps, I'd say strip wash is the least important and many actually start with a simple rinseless wash instead of even doing a very strong wash outside.
 
Very helpful I had no idea. Thanks guys:xyxthumbs:
 
You must log in or register to reply here.
Back
Top