SSR3 Question

RPM06

RPM06

New member
Joined
Mar 3, 2006
Messages
88
Reaction score
0
I'm still trying to find the right solution for my beat up '96 chevy pickup. I've tried XMT #2 and #1 which got ride of most of the marring and swirls but didn't get the deeper scratches. I've really been debating on whether I should wet sand it but wouldn't even know what grit of sand paper to use.

So before I go that route I've just purchased some Poorboy's SSR 3 to be used with my PC. My questions are:

1) Is this product only supposed to be used after a vehicle is wet sanded?

2) Is the PC capable of generating enough speed to break down this product? (I've read mixed reviews on this on the forum)

The trucks present paint condition is that it has a little oxidation, heavy swirling, and light scatches throughout.

Thx,
--Ralph--
 
I've heard mixed reviews as well on using SSR3 and PC. But I've had great success using Optimum Compound with the PC when everyone was saying it was better for a rotary so you never know lol. Scott os somebody else will chime in I'm sure.
 
yes you can use the pc but you going to have to work slow.and i mean you spred 3 on 4 once it brakes down then go to 6. Have no fear i have done it a bunch of times.it works just take your time.
good luck.
 
Can you catch your fingernail in the scratch? If so, you might be best leaving it alone. CLear coat is about the thickness of the cellophane on a cigarette package.
 
SSR 3 is a compound and I have found it does not work best with a PC, but quite well with a rotary. If I was going to use a compound I would go to Optimum Hyper Compound or Menzerna's Powergloss first.
 
killrwheels@autogeek said:
SSR 3 is a compound and I have found it does not work best with a PC, but quite well with a rotary. If I was going to use a compound I would go to Optimum Hyper Compound or Menzerna's Powergloss first.
Click to expand...


Damn...they guy I spoke with from AG customer service told me that it would work fine with a PC. Now I have to eat shipping and send back. Guess I should check with the forum first next time. Thx Killer.

Can you tell me where I can buy Menzerna's Powergloss?
 
It'll break down, but I prefer the other compounds as easier for novice and professional to use. 3M supposedly makes a good compound, but I find their line to be very unfriendly.
 
RPM06 said:
Damn...they guy I spoke with from AG customer service told me that it would work fine with a PC. Now I have to eat shipping and send back. Guess I should check with the forum first next time. Thx Killer.

Can you tell me where I can buy Menzerna's Powergloss?
Click to expand...

I just tried power gloss on my car a few days ago and it did pretty okay, i did notice it left a lot of hazing and was somewhat tuff to work with, i think it would work better with rotary, i wound up finishing with something else, but PG has a far amount of cut, and it is supposed to finish without hazing or any further polishing, maybe I just had bad luck. I got mine at properautocare.com. I'd maybe try ssr 2.5 and a cutting pad first and follow it with ssr 1 and a polishing pad, this combo has worked wonders for me on very rough finishes and a lot of people swear by it.
 
Optimum Compound works great, I found it relatively easy to use with the PC, little to no dusting, and even with an Edge Yellow cutting pad left barely any marring. I was really suprised at how well it finished down, still went over with Optimum Polish though.

SSR3 is some strong
 
Thx all for your feedback.
:cheers:
 
What is the difference between Optimum Compound and Optimum Hyper Compound?
 
SVTContour said:
What is the difference between Optimum Compound and Optimum Hyper Compound?
Click to expand...
OHC is pretty agressive, more similar to SSR3 I would say. OC is kinda like a polish on steroids even though it's a compound if that makes sense. It finishes down like a polish but will do more correction then a normal polish like OP, whereas most compounds are generally going to leave some marring.
 
SSR3 is my go to aggressive polish and has always worked well for me with the PC.

The thing to remember is the pad can get gummed up rather quickly and cause some bad hazing, so make sure to keep your pads clean and it will work great.

Here is heavy oxidation removal with pc & SSR3 I did on a 92 truck
http://www.poorboysworld.net/board/viewtopic.php?t=127

and a video here removing bad swirls from the same truck

http://paintcare-n-detailing.com/video/ (heavy swirl removal)
 
blkyukon said:
SSR3 is my go to aggressive polish and has always worked well for me with the PC.

The thing to remember is the pad can get gummed up rather quickly and cause some bad hazing, so make sure to keep your pads clean and it will work great.

Here is heavy oxidation removal with pc & SSR3 I did on a 92 truck
http://www.poorboysworld.net/board/viewtopic.php?t=127

and a video here removing bad swirls from the same truck

http://paintcare-n-detailing.com/video/ (heavy swirl removal)
Click to expand...

I have to tell you Black Yukon that I am a BIG fan of your work. Your videos are phenomenal. I have them bookmarked on my computer and watch them all the time. I hope some day to be as good a detailer as you! :cheers:
 
Pakshak didn't recomend using SSR3 and a PC he said it just didn't generate enough heat to break down the compound. He said is using a rotary then all day long, but he genearlly would suggest against it.
 
FloridaNative said:
I have to tell you Black Yukon that I am a BIG fan of your work. Your videos are phenomenal. I have them bookmarked on my computer and watch them all the time. I hope some day to be as good a detailer as you! :cheers:
Click to expand...

Thanks FloridaNative, I appreciate it :D The website is always a work in progress and I should have some new stuff (videos, how to's, etc.) on there within the next month.

Pakshak didn't recomend using SSR3 and a PC he said it just didn't generate enough heat to break down the compound. He said is using a rotary then all day long, but he genearlly would suggest against it.
Click to expand...

I disagree, it probably doesn't finish down as well or as fast with a PC, then with a rotary, but it does work. It just takes patients, time and like I said in the previous post, make sure to clean your pads often...if they get gummed up it will haze like crazy.
 
I think what Ranney (Pakshak) and I were offering is, when you get to the level of needing a compound there are several easier ones to use with the PC specifically. Not knocking SSR 3.0, but I still see more power, less work, and better results with several other compounds.
 
killrwheels@autogeek said:
I think what Ranney (Pakshak) and I were offering is, when you get to the level of needing a compound there are several easier ones to use with the PC specifically. Not knocking SSR 3.0, but I still see more power, less work, and better results with several other compounds.
Click to expand...

I haven't used Optimum Hyper Compound or Menzerna's Powergloss so I can't compare.....this is a good excuse to try something new :D
 
blkyukon said:
Thanks FloridaNative, I appreciate it :D The website is always a work in progress and I should have some new stuff (videos, how to's, etc.) on there within the next month.

You're very welcome! :) I can't wait to see your new work. Thank you so much for putting it out there for the world to see! You are a credit to detailers everywhere! :cheers:
Click to expand...
 
blkyukon said:
SSR3 is my go to aggressive polish and has always worked well for me with the PC.

The thing to remember is the pad can get gummed up rather quickly and cause some bad hazing, so make sure to keep your pads clean and it will work great.

Here is heavy oxidation removal with pc & SSR3 I did on a 92 truck
http://www.poorboysworld.net/board/viewtopic.php?t=127

and a video here removing bad swirls from the same truck

http://paintcare-n-detailing.com/video/ (heavy swirl removal)
Click to expand...

Thank you very much! I've saved that site as a favorite and will study it religiously. You my friend are awesome!
:righton:
 
You must log in or register to reply here.
Back
Top